Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Zerodis
BulletPoint1 : [Precise sound sensor] for protection of hand -in -work and health measurement, ensuring safe working conditions for employees
BulletPoint2 : [Easy connection] with transparent line sequences for power supply and serial port, making configuration quick and without complications
BulletPoint3 : [Compact and portable] design weighing only 418g, allowing easy transport between different workplaces
BulletPoint4 : [Included sound calibrator] for accurate and accurate calibration, ensuring consistent and sound measurements
BulletPoint5 : [Lasting use] with a structure designed for several years of normal operation under appropriate conditions, saving replacement costs
Color : One Color
ExternallyAssignedProductIdentifier : 9088358347566
ItemName : Aluminum Alloy of the Modular Sound Dosimeter Sensor Inside the RS232 External Noise Tester for Electrical Industrial Health Appliances
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 33 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sound-and-noise-meters
Manufacturer : Zerodis
Material : Plastic
ModelName : CGTENBS
ModelNumber : Zerodis3x0he2k47w
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Zerodis3x0he2k47w
ProductDescription : 1. Multiple functions: The noise sensor is a digital, modular and multi -functional sound level meter that can be used inside and out, helps a lot
2. Stable and : The noise sensor adopts digital processing chip and digital detection technology, which has the advantages of high reliability, good stability, wide dynamic range and no need for conversion of
3. Applicable scenario: The noise transducer can be widely used in all types of machines, vehicles, ships, electrical appliances and other industrial noise measures, can also be used for environmental noise, hand -in -work, industrial health protection
4. Precise and lasting: This is a complex and accurate device for a precise measurement of sound. The instrument has a lasting structure and can normally be used for several years under proper operating conditions
5. Stable aluminum alloy: The decibel noise tester sensor is made of excellent aluminum alloy material, lightweight, has good strength and avoids erosion

Specification:
Item Type: Noise Sensor
Product Size: Length: Approx. 292mm / 11.5in
Power supply: CC 9-30V
Exit Form: RS232
Measurement range: 30 ~ 130db (a)
Sensitivity: -38 ± 3db (or 12.6mV/PA)
Resolution: 0.1DB
PRECISION: ± 3DB, at room temperature 23 ± 5 ℃, weighted frequency according to the IEC 61672 type 2 standard, calibrated to the 94db input (1kHz)
Frequency range: 20Hz to 12.5khz
Answer Time: 200ms, the time response simulates the time response of the human ear
Calibrator: Sound calibrator of various functions, model 4231
Microphone: Electret Microphone
Directivity: Omnidirectional
Microphone Size: 0.5 in
Load capacity: Current type output ≤350Ω for dc12v power supply; Current Type Output Impedance ≤900Ω, Voltage Output Type Impedance ≥1kΩ to DC24V power supply
Maximum energy consumption: 500mw
Material: aluminum alloy
Work environment: temperature -40 ℃ - 80 ℃
: ≤100%Rh without condensation
Protection Class: IP55
Weight: 418 g / 14.7 Oz (approx.)
Troubleshooting:
The meter displays incorrect values ​​at the output. The correct data cannot be obtained because the cable connection is defective or the communication serial port is defective. Make sure the cable connection is correct and secure, if the serial port is busy, and if the serial port settings are correct.
The line sequences are:
Red: positive power supply
Black: Connect to RX in pin 2 of the serial port
HUANG: Connect to pin 3 tx from the computer port of the computer
Green: negative power supply

How to use:
Install and use according to the appropriate tension.

Packagelist:
1 x noise sensor
1 x cable
1 x manual

Observation:
1. Check the packaging for integrity and confirm that the product model corresponds to what you have selected; 2. Do not connect the wires while they are active, only the energy after confirming the connections is correct;
3. Sensor wires length may affect the product output , do not modify the product arbitrarily during use;
4. Sensors are accurate devices, users should not disassemble them, use incisive or corrosive liquids to touch the sensor surface to avoid damaging the product.
ProductSiteLaunchDate : 2025-04-27T03:58:31.810Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 53121600