Cart 2 india

Specification
Brand : CANADUINO
BulletPoint1 : Module with 8 Relays and LOW-active Opto-Isolated Inputs; it Requires a 5V Power Supply and works on input signals between 3V and 24V which makes it compatible with several different devices like Microcontroller (Arduino, STM32, ESP8266 etc.) and Programmable Logic Controllers
BulletPoint2 : Power Supply 5VDC 600mA; Control Voltage 3-24VDC; max. Input Current 22mA at 24VDC; Load mx. 250VAC 10A; LOW active Inputs
BulletPoint3 : Dimensions: Size 138 x 55 x 19 mm; Weight 110 g
BulletPoint4 : Content: Relay Module assembled and tested
BulletPoint5 : NOTE: Visit our Amazon Store for more exciting Electronics. For Downloads, Documentation and Product Support please visit UNIVERSAL-SOLDER Website.
ConnectorType : Kf128-3.81 Terminal Block
CurrentRating : 5 amps
ExternallyAssignedProductIdentifier1 : 735209936019
ExternallyAssignedProductIdentifier2 : 0735209936019
IncludedComponents : Blu-ray
ItemName : CANADUINO® 8 Relay Module Shield 10A with Optocoupler Inputs 3-24V
ItemPackageDimensions_Height : 19 millimeters
ItemPackageDimensions_Length : 180 millimeters
ItemPackageDimensions_Width : 60 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : solid-state-relays
Manufacturer : UNIVERSAL-SOLDER Electronics
Material : copper
MaximumSwitchingCurrent : 5 amps
MaximumSwitchingVoltage : 32 volts
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
ModelNumber : N.A.
NumberOfItems : 1
NumberOfTerminals : 2
OperationMode : Automatic
PartNumber : N.A.
ProductDescription :

The 8 Relay Module comes with Opto-insulated inputs and can be driven by an input voltage of 3-24V DC. The relays are 5V models, needing a 5V DC power supply to work. The maximum switchable load is 10A at 250V AC or 30V DC (max.).

The 2 different power supply modes of the 2 Relay Modules can be selected by jumpers.

Our 8 Relay Module needs about 70mA per activated relay (at 5V).

Please make sure, your power supply is strong enough.

Because of the optocoupler is the necessary input current just about 1mA (but shouldn’t exceed 20mA), and the relay board can be directly controlled by any development board like Arduino or Raspberry, and also by every available microcontroller (Atmel, ST, PIC etc.) with a logic level of 3V or above.

The dimensions are 55 (W) 138 (L) 19 (H) mm.

Other relay modules with 2 relays, 4 relays and 8 relays are also available.

High-Current relay modules (30A) are available as well.

Finally, we offer relay modules for the ESP-01 IoT module, WeMos D1 Mini, remote-controlled relays, and a WiFi 4-Channel relay DIY kit.

ProductSiteLaunchDate : 2017-01-31T12:33:59.549Z
UnspscCode : 43201400