Cart 2 india

Specification
Brand : Garosa
BulletPoint1 : STRONG DRIVING ABILITY: It adopts patch optocoupler isolation, strong driving ability, stable performance; current 5mA.
BulletPoint2 : PREMIUM RELAY MODULE: The module uses high-quality relay, the maximum load of the normally open interface: AC 250V/10A, DC 30V/10A.
BulletPoint3 : FAULT-TOLERANT DESIGN: Fault-tolerant design, even if the control line is broken, the relay will not move.
BulletPoint4 : TRIGGERED BY HIGH/LOW LEVEl: The module can be triggered by a jumper to set a high level or a low level.
BulletPoint5 : USER-FRIENDLY DESIGN: Power indicator (green), relay state indicator (red), user-friendly interface design. All interfaces can be directly connected through the terminal block, very convenient.
Color : One Color
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier : 3002979740496
ExternallyAssignedProductIdentifier1 : 0739552002148
ExternallyAssignedProductIdentifier2 : 739552002148
ItemName : 2 Channel Relay Module with Optocoupler High Low Level Expansion Board Fault-Tolerant Design Module(5V),Module
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : solid-state-relays
Manufacturer : Garosa
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 250 volts
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
ModelName : C5X2Y9
ModelNumber : C5X2Y9
NumberOfItems : 1
OperationMode : Automatic
PartNumber : Garosafrg0yheasn-01
ProductDescription :

Specification:
Module Size:50 x 41 x 18.5mm / 1.97 x 1.61 x 0.73in
Hole Diameter: 3.1mm/0.12in
Hole Interval Distance:44.5 x 35.5mm / 1.75 x 1.4in
Wiring Diagram:
DC+: Connect the positive pole of the power supply (the voltage is required by the relay, there are 5V.9V.12V and 24V selection).
DC-: connected to the negative pole of the power supply.
IN1:1 terminal, you can set the high or low level control relay to pull in.
IN2: 2 channel terminal, you can set the high or low level control relay to pull in.
Relay output:
NO1: 1 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM1.
COM1:1 channel relay common interface.
NC1: 1 channel relay normally closed interface, short circuit connection with COM1 before the relay is closed, suspended after suction.
NO2: 2 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM2.
COM2: 2 channel relay common interface.
NC2: 2-channel relay normally closed interface, short-circuit with COM2 before the relay is closed, and after the suction.
High and low selection:
1. S1 is a high-low selection for 1 relay;
2. is the high and low level selection of 2 relays.
3 com is shorted with low, the corresponding relay is triggered by low level, and when com is shorted with high terminal, it is triggered by high level.

Package List:
1 x Module

ProductSiteLaunchDate : 2019-08-26T00:00:00.000Z
Size : CDG1-1DA 40A
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39122300