Cart 2 india

Specification
Brand : uxcell
BulletPoint : 1/4 inch 110V-120V AC Brass Electric Solenoid Valve NPT Gas Water Air N/C
BulletPoint1 : This solenoid valve is basic automated components that electromagnetically control fluids.
BulletPoint2 : Flow Direction: Unidirectional (Follow the Arrow on Valve Body); Positive Pulse: Opening Valve; Negative Pulse: Closing Valve.
BulletPoint3 : Voltage: DC3.6V; Thread Diameter: G1/4"; Wire Length: 180mm/7.1"; Total Size: 50mm x 48mm x 24mm (L*W*H).
BulletPoint4 : Solenoid type magnetic field makes the valve reach higher pressure, which greatly improves the flow of the passed medium.
BulletPoint5 : Replacement solenoid valve for induction fittings. Replace the bad work solenoid valve for machine.
BulletPoint6 : Please Note: The solenoid valve may experience leaks as a result of impurities accumulated over multiple uses. This issue can be resolved by disassembling the valve and thoroughly cleaning it.
Color : Silver
ConnectivityProtocol : X-10
ConnectorType : Clamp
CurrentRating : 0.02 amps
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier : 7006475405992
ExternallyAssignedProductIdentifier1 : 0735752708750
ExternallyAssignedProductIdentifier2 : 735752708750
FitType : Universal
IncludedComponents : No
InternationalProtectionRating : IP541
ItemName : uxcell Pulse Solenoid Valve DC3.6V Quick Connection Thread Valves with Filter
ItemPackageDimensions_Height : 12.7 centimeters
ItemPackageDimensions_Length : 2.1 centimeters
ItemPackageDimensions_Width : 9.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-solenoid-valves
Manufacturer : uxcell
Material : Meta, plastic
Material1 : Stainless Steel
Material2 : Carbon Steel
Material3 : Brass
ModelName : loader
ModelNumber : a19052200ux0854
NumberOfItems : 1
NumberOfPorts : 1
OperatingVoltage : 12 volts
OperationMode : ON-OFF
PartNumber : a19052200ux0854
ProductDescription : Specification:
Positive Pulse: Opening valve
Negative Pulse: Closing Valve
Voltage: DC3.6V
Wire Length: 180mm/7.1"
Working Pressure: 0.02-1.0MPa
Total Size: 50mm x 48mm x 24mm (L*W*H)
Flow Direction: Unidirectional (Follow the Arrow on Valve Body)

Install and Use Attentions:
1. The water solenoid valve selects the corresponding voltage and temperature according to the actual situation when selecting the type.
2. When installing the solenoid valve, medium flow direction must be consistent with the direction arrow as shown in the valve body, the valve must be installed in horizontal pipe runs. Solenoid valve coil keep in a vertical position, the valve can not be put in places with splashing water or water leakage.
3. Please install a filter screen at the inlet end to avoid inhalation so that the solenoid valve can not be reset, resulting in water closes or obstructed opening.
4. If the solenoid valve is closed or blocked, please open the top four screws to clean the inner.
5. Before installing the solenoid valve, the pipeline should be cleaned.

Package Included:
1 x Pulse Solenoid Valve

ProductSiteLaunchDate : 2019-08-31T16:00:26.628Z
Size : 0.25 Inch
SpecificationMet : reach
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Manual Push/Pull
UnitCount : 1
UnspscCode : 40141600
ValveType : solenoid valve