SpecificationBrand : U.S. Solid
BulletPoint : This is a genuine OEM (Original Equipment Manufacturer) part.
BulletPoint1 : Quick Reaction: The USS-ZSV solenoid valve features a quick reaction ability and is able to be started with zero pressure
BulletPoint2 : Direct Acting: Built with direct acting design, the magnetic valve has strong resistance to impurities in the medium
BulletPoint3 : High Cost-performance: This zinc-alloy solenoid valve offers the same performance and less cost as brass in regular usages
BulletPoint4 : High Flow: The congenital structure of this solenoid valve make it a higher flow capacity than pilot-operated solenoid valve
BulletPoint5 : Applications: This water valve has wide applications including house water, laundry equipment, industrial water control, pumps and so on
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier : 00850021979348
ExternallyAssignedProductIdentifier1 : 888107102656
ExternallyAssignedProductIdentifier2 : 0888107102656
FitType : Vehicle Specific
IncludedComponents : Replacement Part
ItemName : U.S. Solid Solenoid Valve - Zinc-Alloy 24V AC Electric Water Valve, NBR Seal (3/8
ItemPackageDimensions_Height : 9.398 centimeters
ItemPackageDimensions_Length : 5.9944 centimeters
ItemPackageDimensions_Width : 8.2042 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-solenoid-valves
Manufacturer : U.S. Solid
Material : Plastic
Material1 : Zinc
Material2 : Brass
ModelNumber : USS-ZSV12
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPorts : 2
PackageLevel : unit
PartNumber : USS-ZSV12
ProductDescription :
While in application of regular water pressure, the USS-ZSV solenoid valves can be an excellent tool to assist you control the water line. It features a zinc alloy valve body, which offer enough pressure resistance to medium but cost less in comparison with brass body.
Specifications:
Pipe Size: 3/8"
Flow Aperture: 4 mm
Body Material: Zinc Alloy
Gasket / Diaphragm / Seal: NBR
Operation Type: Direct Lift Valve
Operation Mode: Normally Closed
Voltage: AC 24V
Power rating: 22 VA
Suitable Media: Water, oil, Diesel fuel, kerosene etc.
Operational pressure range: Air/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)
Flow value: 0.6 Cv
Temperature, Minimum: 14 degrees Fahrenheit (-10 degrees Celsius)
Temperature Maximum: 176 degrees Fahrenheit (80 degrees Celsius)
OVERHEATING WARNING: Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80℃), which is fully complied with national standard: JB/T7352-2010. If energized continuously for more than 8 hours the coil may burn.
ProductSiteLaunchDate : 2022-04-22T05:31:01.138Z
Size : 3/8”
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : solenoid valve