Cart 2 india

Specification
Brand : SNS
BulletPoint1 : 2 way solenoid valve, 3/4" NPT port, brass body, DC12 volt
BulletPoint2 : High quality normally closed electric solenoid valve, for water, air or oil
BulletPoint3 : Working temperature range: -5 ℃~85 ℃
BulletPoint4 : It's applicable in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.)
BulletPoint5 : We have solenoids available in AC/DC and various size NPT threads as well
BulletPoint6 : Purchase Fluidhaus sub plate or manifold series SAS6 or MPA6 separately.
BulletPoint7 : Solenoid Power: DC= 30 watts, AC = 50VA (220VA inrush)
BulletPoint8 : Operating temperature = -22֯F to 174֯F
BulletPoint9 : Valve can be mounted in any direction.
Color : C-All Ports Closed in Center Position
Department : Tools
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 0746555534620
ExternallyAssignedProductIdentifier2 : 746555534620
IncludedComponents : 1 solenoid valve, 1 silencers, 2 joints
ItemName : SNS 3/4"NPT Brass Electric Solenoid Valve Normally Closed Water,Air,Diesel 2W200-N20/DC12V
ItemPackageDimensions_Height : 12.2 centimeters
ItemPackageDimensions_Length : 6.5 centimeters
ItemPackageDimensions_Width : 8.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-solenoid-valves
Manufacturer : China SNS Pneumatic Co.,Ltd
Material : Brass
Material1 : Iron
Material2 : Cast Iron
MaximumOperatingPressure : 4560 pounds_per_square_inch
ModelName : 3V200 Series Solenoid Valve(3/2 way)
ModelNumber : 2W200-20/DC12V NPT
NumberOfItems : 1
NumberOfPorts : 4
PackageLevel : unit
PartNumber : 2W200-20/DC12V NPT
ProductDescription : ndustrial grade hydraulic directional valve used in high volume OEM equipment. These valves are used to control the hydraulic flow path to an actuator (cylinder or motor). The variety of spool options available allow for various movement types based on the application requirements of your cylinder or motor. >Solenoid Voltage: 12VDC, 24VDC, 110VAC (50 or 60 hz), 220VAC (50 or 60 hz) >Spool Configurations: |C: Closed center spool, all ports blocked when centered. Useful to switch actuator directions and to fully stop cylinder or motor when centered. Make sure there is a relief valve (Fluidhaus VMR6-P-R-30-1) to protect overrunning loads from spiking the pressure during sudden stops when centering. Note that it is normal to have slight leakage of oil across the spool in the center position and slow drifting of the actuator could be possible. If this is an issue use the T spool with a P.O. check valve. |M: Motor spool, A and B ports to tank and P port blocked when centered. Actuators will move freely from external forces when the valve is in the center position. Motors and cylinders will coast to a stop when centering. Adding an A&B port P.O. check valve (Fluidhaus VMCP6-AB-1) under this valve will ensure a positive stop and hold the position of a motor and cylinder for longer durations than with just a closed center spool valve C. |T: Tandem Spool, A and B ports closed and P to T in center position: Actuators will stop in center position and the supply pressure will be directed to tank. Commonly used with fixed displacement gear pumps so pressure can flow direct to tank and not build up heat.| |H: Open Center Spool. All ports open to tank in the center >D03 (NG6) Cetop mounting can be mounted to standard available sub plates and bar manifolds. >Maximum flow of 21 gpm for DC power and 15.8 gpm for AC (reference Solenoid Power limit chart) >Maximum working pressure = 4560psi (315 Bar) >3-position, 4-way, Spring centered, energize to shift double solenoid
ProductSiteLaunchDate : 2018-06-04T07:00:00.000Z
Size : 3/4''NPT
SpecificationMet : original equipment manufacturers
Style : DC12V
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : solenoid valve