Cart 2 india

Specification
Brand : Fluidhaus
BulletPoint1 : Robust design proven in many high-volume original equipment manufacturers machines. Brand labeled for various iconic OEM's equipment
BulletPoint10 : Pressure : 0.1-1.0Mpa
BulletPoint2 : Includes mounting bolts (M5x45mm long)
BulletPoint3 : Rated IP65 for dust and water resistance.
BulletPoint4 : Includes lighted DIN connector for each coil. LED illuminate’s clear connector housing when power is supplied to the connector/coil.
BulletPoint5 : Used in mobile, industrial. automation and construction equipment
BulletPoint6 : Purchase Fluidhaus sub plate or manifold series SAS6 or MPA6 separately.
BulletPoint7 : Solenoid Power: DC= 30 watts, AC = 50VA (220VA in-rush)
BulletPoint8 : Operating temperature = -22֯F to 174֯F
BulletPoint9 : Valve can be mounted in any direction.
Color : T-A&B to Blocked and P to T in Center
ExteriorFinish : Rubber,Stainless Steel
ExternallyAssignedProductIdentifier1 : 853996003773
ExternallyAssignedProductIdentifier2 : 0853996003773
IncludedComponents : Aluminium Valve
ItemName : Hydraulic Directional Control Electric Solenoid Valve D03 (NG6) 21 GPM 4560 psi, AC or DC 3 Position… (24VDC, T-A&B to Tank and P Blocked in Center Position)
ItemPackageDimensions_Height : 32.9 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 19.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-solenoid-valves
Manufacturer : Fluidhaus
Material : Stainless Steel,Viton
Material1 : Iron
Material2 : Cast Iron
MaximumOperatingPressure : 101.5 pounds_per_square_inch
ModelName : Walfront36atn8w5ph
ModelNumber : USS2-00067
NumberOfItems : 1
NumberOfPorts : 4
PartNumber : USS2-00067
ProductDescription : Industrial grade hydraulic directional valve used in high volume OEM equipment. These valves are used to control the hydraulic flow path to an actuator (cylinder or motor). The variety of spool options available allow for various movement types based on the application requirements of your cylinder or motor. >Solenoid Voltage: 12VDC, 24VDC, 110VAC (50 or 60 hz), 220VAC (50 or 60 hz) >Spool Configurations: |C: Closed center spool, all ports blocked when centered. Useful to switch actuator directions and to fully stop cylinder or motor when centered. Make sure there is a relief valve (Fluidhaus VMR6-P-R-30-1) to protect overrunning loads from spiking the pressure during sudden stops when centering. Note that it is normal to have slight leakage of oil across the spool in the center position and slow drifting of the actuator could be possible. If this is an issue use the T spool with a P.O. check valve. |M: Motor spool, A and B ports to tank and P port blocked when centered. Actuators will move freely from external forces when the valve is in the center position. Motors and cylinders will coast to a stop when centering. Adding an A&B port P.O. check valve (Fluidhaus VMCP6-AB-1) under this valve will ensure a positive stop and hold the position of a motor and cylinder for longer durations than with just a closed center spool valve C. |T: Tandem Spool, A and B ports closed and P to T in center position: Actuators will stop in center position and the supply pressure will be directed to tank. Commonly used with fixed displacement gear pumps so pressure can flow direct to tank and not build up heat.| |H: Open Center Spool. All ports open to tank in the center >D03 (NG6) Cetop mounting can be mounted to standard available sub plates and bar manifolds. >Maximum flow of 21 gpm for DC power and 15.8 gpm for AC (reference Solenoid Power limit chart) >Maximum working pressure = 4560psi (315 Bar) >3-position, 4-way, Spring centered, energize to shift double solenoid
ProductSiteLaunchDate : 2021-05-24T12:39:28.614Z
Size : 24VDC
SpecificationMet : original equipment manufacturers
SpecificUsesForProduct : Bobcat loaders, Bobcat excavators, John Deere 7200, 7400, 7500, 7500 E-Cut, 7700, 8500, 8500 E-Cut, 8700, 8800 8000 E-Cut, 2653B
Style : T-A&B to Blocked and P to T in Center Position
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : solenoid valve
Voltage : 220 volts