Cart 2 india

Specification
Brand : Fluidhaus
BulletPoint1 : Robust design proven in many high-volume original equipment manufacturers machines.
BulletPoint2 : Includes mounting bolts (M5x45mm long)
BulletPoint3 : Rated IP65 for dust and water resistance.
BulletPoint4 : Includes lighted DIN connector for each coil. LED illuminate’s clear connector housing when power is supplied to the connector/coil.
BulletPoint5 : Used in mobile, industrial. automation and construction equipment
BulletPoint6 : Purchase Fluidhaus sub plate or manifold series SAS6 or MPA6 separately.
BulletPoint7 : Solenoid Power: DC= 30 watts, AC = 50VA (220VA inrush)
BulletPoint8 : Operating temperature = -22֯F to 174֯F
BulletPoint9 : Valve can be mounted in any direction.
Color : C-All Ports Closed in Center Position
Department : Tools
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 0746555534620
ExternallyAssignedProductIdentifier2 : 746555534620
IncludedComponents : 1 solenoid valve, 1 silencers, 2 joints
ItemName : Hydraulic Directional Control Electric Solenoid Valve D03 (NG6) 21 GPM 4560 psi, AC or DC 3 Position (24VDC, C-All Ports Closed in Center Position)
ItemPackageDimensions_Height : 28.194 centimeters
ItemPackageDimensions_Length : 6.604 centimeters
ItemPackageDimensions_Width : 21.59 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-solenoid-valves
Manufacturer : Fluidhaus
Material : Brass
Material1 : Iron
Material2 : Cast Iron
MaximumOperatingPressure : 4560 pounds_per_square_inch
ModelName : 3V200 Series Solenoid Valve(3/2 way)
ModelNumber : b59a3255-44c2-47c6-a655-38e2cf8dfe06
NumberOfItems : 1
NumberOfPorts : 4
PackageLevel : unit
PartNumber : 3v210 08B
ProductDescription : ndustrial grade hydraulic directional valve used in high volume OEM equipment. These valves are used to control the hydraulic flow path to an actuator (cylinder or motor). The variety of spool options available allow for various movement types based on the application requirements of your cylinder or motor. >Solenoid Voltage: 12VDC, 24VDC, 110VAC (50 or 60 hz), 220VAC (50 or 60 hz) >Spool Configurations: |C: Closed center spool, all ports blocked when centered. Useful to switch actuator directions and to fully stop cylinder or motor when centered. Make sure there is a relief valve (Fluidhaus VMR6-P-R-30-1) to protect overrunning loads from spiking the pressure during sudden stops when centering. Note that it is normal to have slight leakage of oil across the spool in the center position and slow drifting of the actuator could be possible. If this is an issue use the T spool with a P.O. check valve. |M: Motor spool, A and B ports to tank and P port blocked when centered. Actuators will move freely from external forces when the valve is in the center position. Motors and cylinders will coast to a stop when centering. Adding an A&B port P.O. check valve (Fluidhaus VMCP6-AB-1) under this valve will ensure a positive stop and hold the position of a motor and cylinder for longer durations than with just a closed center spool valve C. |T: Tandem Spool, A and B ports closed and P to T in center position: Actuators will stop in center position and the supply pressure will be directed to tank. Commonly used with fixed displacement gear pumps so pressure can flow direct to tank and not build up heat.| |H: Open Center Spool. All ports open to tank in the center >D03 (NG6) Cetop mounting can be mounted to standard available sub plates and bar manifolds. >Maximum flow of 21 gpm for DC power and 15.8 gpm for AC (reference Solenoid Power limit chart) >Maximum working pressure = 4560psi (315 Bar) >3-position, 4-way, Spring centered, energize to shift double solenoid
ProductSiteLaunchDate : 2021-07-10T17:56:58.672Z
Size : 24VDC
SpecificationMet : original equipment manufacturers
Style : C-All Ports Closed in Center Position
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : solenoid valve