Cart 2 india

Specification
Brand : Metcal
BulletPoint1 : 90 Watts, Adjustable Temperature
BulletPoint2 : Efficient Inductive Heating Technology
BulletPoint3 : Metcal's first adjustable temperature soldering system
BulletPoint4 : Single port, small footprint
BulletPoint5 : Includes GT90 unit, handpiece, workstand, external power supply, cartridge removal pad
ExternallyAssignedProductIdentifier : 01220000612525
IncludedComponents : Soldering Station
ItemName : Metcal GT90-HP-T4 90 W T4 Soldering System w/Handpiece & Workstand (STN, ADPT, HP-T4UF, WS), GT Series
ItemPackageDimensions_Height : 41.402 centimeters
ItemPackageDimensions_Length : 21.6916 centimeters
ItemPackageDimensions_Width : 27.6098 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : soldering-stations
Manufacturer : OK International
Material : copper
ModelName : GT90-HP-T4
ModelNumber : GT90-HP-T4
NumberOfChannels : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : GT90-HP-T4
PowerSourceType : hand_powered
ProductDescription : 1. MINI THERMOSTAT: Smart thermostatic heating table in super mini size with 3D printed shell without layering
2. FUNCTIONS AND EFFECTS: The heating soldering plate can eliminate redundant functions, retain enough effective heating area, greatly saving energy consumption and heating time
3. DISPLAY AND CONTROL: Welder hot plate with Organic Light Emitting Diode screen display, support temperature control
4. LOW LOSS: The application field of the soldering hot plate is wide, and the operating parts are centrally preheated to reduce the damage to nearby parts
5. FAST AND EFFICIENT: Chip welding station supports USB Type C interface and PD protocol for faster heating speed

Specification:
Item Type: Heating Soldering Plate
Input Interface: Type C
Power Supply: PD65W 20V 3.25A (PD65W recommended)
Temperature Range: 0℃~350℃ (the lowest temperature is ambient temperature, can only be increased, can not be reduced)
Shell: 3D printed shell, no layering
Product Size(LxWxH): Approx. 5.6 x 5.6 x 3.5cm / 2.2 x 2.2 x 1.4in

How to Use:
1. Double Keys Pressed At The Same Time: Heat or stop heating
2. Press and hold twice to enter the menu screen or exit
3. Press and hold the double key to confirm

packing list:
1 x Heating Soldering Plate

Notice:
1. The recommended temperature should not exceed 250℃.
2. The power supply needs a charger that supports the PD protocol, the voltage is 20V 3.25A, and the voltage that can support the PD protocol is 20V in theory.


ProductSiteLaunchDate : 2024-05-06T16:29:02.355Z
SupplierDeclaredDgHzRegulation : not_applicable
TemperatureStability : 350 degrees_celsius
UnitCount : 1
UnspscCode : 23271800
UpperTemperatureRating : 350 degrees_celsius
Voltage : 20 volts
Wattage : 90 watts