Cart 2 india

Specification
Brand : Generic
BulletPoint1 : ESD Mats meet the ESD work surface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1.
BulletPoint2 : The Top Layer is Dissipative. Resistively of Surface Layer (10 7~10 9 ohms)
BulletPoint3 : The Bottom Layer is Conductive. Resistivity of Bottom Layer (10 3~10 5 ohms, rattler loss <0.02g/cm2)
BulletPoint4 : Any built-up static charges dissipate without sudden discharge that can harm the internal structure of silicon circuits.
BulletPoint5 : Time for Static Dissipation (<0.5S)
BulletPoint6 : Comes with 10mm snaps installed, and grounding cable.
BulletPoint7 : Grounding: this material must be properly grounded for optimum electrical performance.
ExternallyAssignedProductIdentifier : 6458517123431
ExternallyAssignedProductIdentifier1 : 0371127402450
ExternallyAssignedProductIdentifier2 : 371127402450
ExternallyAssignedProductIdentifier3 : 00037103305350
FinishType : Finish
IncludedComponents : Comes as a Combo Set
IncludedComponents1 : Soldering Iron
IncludedComponents2 : Solder Tip
ItemName : ESD Dissipative Mat Kit - Royal Blue - Heat Resistant Soldering Mat with Grounding Cable (2' x 7' (24" x 84"))
ItemPackageDimensions_Height : 15.494 centimeters
ItemPackageDimensions_Length : 1.016 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemPackageQuantity : 1
ItemShape : 2' x 7' (24" x 84")
ItemTypeKeyword : soldering-stations
Manufacturer : Distat
Material : silicon
ModelName : Distat ESD Soldering Mat Kit
ModelNumber : 2L-NR-HRSM-RB-GC
NumberOfChannels : 1
NumberOfItems : 50
PartNumber : YIDAB008
PowerSourceType : Hand Powered
ProductDescription :

Protection against ESD is required during production, storage, and shipping stages of sensitive electronic components. ESD can damage or cause defects in electronic products, electronic component (such as Surface Mount Device components), and failure in Printed Circuit Boards. ESD-Safety and protection is required across a broad range of industries including electronics, automotive, biotech and pharmaceutical, medical devices, and semiconductors.

Damage from ESD during mobile phone repairing is very common.

What is ESD?

Static, formally referred to as electrostatic charge, arises from excess of electrons on one surface and a deficiency on the other. The imbalance of electrons thus causes an electrical field that is capable of influencing other objects at a distance. The charge will remain in place unless it has a path through which it can flow. It may remain in place for some time and this gives rise to the term "static electricity". The word static simply means the charge cannot be equalized or transferred through electromotive force until there is a decrease in the capacitance between two objects.
ProductSiteLaunchDate : 2023-07-30T23:21:41.872Z
Style : LST0802
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23270000
Voltage : 120 volts
Wattage : 75 watts