Cart 2 india

Specification
Brand : Bedrock Jewelry
BulletPoint : Lead-Free / RoHS Compliant
BulletPoint1 : Flowing at 1,450°F (788°C),
BulletPoint2 : Melt temperature : 1,365°F (741°C)
BulletPoint3 : 75% Silver contend with a flux/binder (25%), Lead-free, cadmium-free
BulletPoint4 : Extremely strong joint, Creates a clean, tarnish-free, silver-color joint
BulletPoint5 : Made in the USA
BulletPoint6 : MADE IN USA
Color : Silver
ContainsLiquidContents : 1
CustomerPackageType : Standard Packaging
Directions : Apply flux on the surface via dip, spray, foam, wave, or brush application. Clean residue with MG 4140 or 413B flux removers.
ExternallyAssignedProductIdentifier : 7402000174355
ExternallyAssignedProductIdentifier1 : 758339122169
ExternallyAssignedProductIdentifier2 : 0758339122169
ExternallyAssignedProductIdentifier3 : 0639713230765
ExternallyAssignedProductIdentifier4 : 0701158990433
Hazmat : 9
Hazmat1 : ALCOHOLS, N.O.S., ALCOHOLS, N.O.S. (vapour pressure at 50 °C more than 110 kPa) (contains ethanol and isopropanol); ALCOHOLS, N.O.S.
Hazmat10 : CN_GroundOnly
Hazmat11 : DE_LimitedQuantity
Hazmat12 : EG_LimitedQuantity
Hazmat13 : ES_LimitedQuantity
Hazmat14 : FR_LimitedQuantity
Hazmat15 : GB_LimitedQuantity
Hazmat16 : IN_GroundOnly
Hazmat17 : IT_LimitedQuantity
Hazmat18 : JP_GroundOnly
Hazmat19 : MX_LimitedQuantity
Hazmat2 : UN1987
Hazmat20 : NL_LimitedQuantity
Hazmat21 : PL_LimitedQuantity
Hazmat22 : SA_LimitedQuantity
Hazmat23 : SE_LimitedQuantity
Hazmat24 : SG_LimitedQuantity
Hazmat25 : TR_LimitedQuantity
Hazmat26 : US_ORMD
Hazmat27 : ZA_LimitedQuantity
Hazmat3 : II
Hazmat4 : 3
Hazmat5 : AE_LimitedQuantity
Hazmat6 : AU_LimitedQuantity
Hazmat7 : BE_LimitedQuantity
Hazmat8 : BR_LimitedQuantity
Hazmat9 : CA_LimitedQuantity
IncludedComponents : 25 Flux Brushs
Ingredients : Flux
IsLiquidDoubleSealed : 1
ItemDisplayDimensions_Length : 6 millimeters
ItemDisplayVolume : 125 milliliters
ItemDisplayWeight : 0.3 kilograms
ItemForm : Liquid
ItemName : Silver Solder Paste, Hard, with a flux, Ss 75, 3 dwt syringe, lead-free, cadmium-free, Made in USA (Hard)
ItemPackageDimensions_Height : 11.6 centimeters
ItemPackageDimensions_Length : 1.1 centimeters
ItemPackageDimensions_Width : 6.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : solder-flux
ItemVolume : 125 milliliters
LiquidContentsDescription : Liquid Flux
LiquidVolume : 4.2 fluid_ounces
Manufacturer : Bedrock Jewelry
Material : Hard
ModelName : Weller WLACCFB-02 Flux Brush, 25 Pack
ModelNumber : CQ2LF
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
PackageLevel : unit
PartNumber : CQ2LF
PowerSourceType : hand_powered
ProductDescription :

Directions for Using Solder Paste
- Remove all dirt, excessive oxides, etc. from the joint area.
- Joint clearance (gap) should be as small as possible. The joint should be flat and smooth.
- Apply the paste to the joint. To prevent a continuous flow of solder from the needle after applying solder to the joint, pull back on the syringe plunger to relieve pressure.
- Apply heat to the article away from the joint. Keep heat/flame away from the needle tip. As binder "burns off", move the flame to the joint area.
- Remove flame immediately after the solder melts and flows.

Caring for the Needle Tip and Syringe
- Remove tip cap from the syringe, and press the desired needle tip onto the tip of the syringe. Save the tip cap for further use.
- When storing the solder paste for periods of time (when you will not be actively using the. syringe for several days) remove the needle tip and replace the tip cap on the syringe. Store syringe in a cool place. Save the needle tip for further use.
- Keep needle tips clean. If tips clog, clean with a fine wire.

ProductSiteLaunchDate : 2013-06-07T07:00:00.000Z
SafetyDataSheetUrl : http://www.chipquik.com/msds/CQ2LF.pdf
Scent : Unscented
Size : 4.2 Fl Oz (Pack of 1)
SpecificUsesForProduct : Industrial Machinery
StreetDate : 2017-12-12T00:00:01Z
Style : Pen
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Metal
UnitCount : 1