SpecificationBrand : BEEYUIHF
BulletPoint : Solder Flux
BulletPoint1 : BEEYUIHF #8403 is made of No clean, halogen free, acid free, non-corrosive flux, white paste, good fluidity, moderate viscosity, less residue, less smoke, suitable for cell phone PCB, BGA and PGA and other SMD ball array solder joints rework and ball patching.
BulletPoint2 : How to use electronics flux: wipe the electronic components and their Printed Circuit Board clean before soldering, squeeze the right amount of flux on the surface of the components or wire, heat up the soldering iron to 200 ℃ or more, and then the tin will be melted in the solder. After adding flux, it is very easy to put on the tin, and the structure of the solder joint is very full and strong and bright.
BulletPoint3 : The most prominent role of #8403 flux is to remove oxidation,soldering flux is a kind of chemical substances to promote soldering, have to remove the surface of the solder material oil, remove the oxide film, increase the role of the soldering area. Flux paste also has the role of protecting components and preventing re-oxidation. Flux is an indispensable auxiliary material in soldering and repair, to achieve better soldering and repair results.
BulletPoint4 : #8403 solder flux main function is to reduce the surface tension generated by the contact between the solder and the lead pin metal, enhance the surface wetting force, and enhance the penetration of the organic activator, which is the key role of flux. Flux paste is fine and white, with very little residue, and can achieve the performance of No clean.
BulletPoint5 : #8403 soldering flux paste product applications: applicable to sensors, wires, motors, fuses, connectors, metal shells, lighting, electronic components, SMT repair, BGA chip ball implantation, etc.
Color : Amber
CustomerPackageType : 1
ExternallyAssignedProductIdentifier : 7426880690705
ExternallyAssignedProductIdentifier1 : 708210645683
ExternallyAssignedProductIdentifier2 : 0708210645683
ExternallyAssignedProductIdentifier3 : 00032277603035
ExternallyAssignedProductIdentifier4 : 00038753300139
Hazmat : 3
Hazmat1 : ZINC CHLORIDE SOLUTION
Hazmat10 : EG_LimitedQuantity
Hazmat11 : ES_LimitedQuantity
Hazmat12 : FR_LimitedQuantity
Hazmat13 : GB_LimitedQuantity
Hazmat14 : IN_GroundOnly
Hazmat15 : IT_LimitedQuantity
Hazmat16 : JP_GroundOnly
Hazmat17 : MX_LimitedQuantity
Hazmat18 : NL_LimitedQuantity
Hazmat19 : PL_LimitedQuantity
Hazmat2 : UN1840
Hazmat20 : SA_LimitedQuantity
Hazmat21 : SE_LimitedQuantity
Hazmat22 : SG_LimitedQuantity
Hazmat23 : TR_LimitedQuantity
Hazmat24 : US_ORMD
Hazmat25 : 8
Hazmat26 : US_ORMD
Hazmat3 : III
Hazmat4 : AE_LimitedQuantity
Hazmat5 : AU_LimitedQuantity
Hazmat6 : BR_LimitedQuantity
Hazmat7 : CA_LimitedQuantity
Hazmat8 : CN_GroundOnly
Hazmat9 : DE_LimitedQuantity
IncludedComponents : 1Set 10mL Soldering Paste Flux (1Pcs Syringe push +2Pcs Needle Nozzle)
ItemDisplayWeight : 2 ounces
ItemLength : 6 inches
ItemName : BEEYUIHF No-Clean Soldering Flux Paste, Smooth Flow Solder flux for Soldering, Electronics Flux Paste for PCB/IC/BGA/SMD Repairing DIY (10mL Syringe) #8403 (1 Pack)
ItemPackageDimensions_Height : 14.3002 centimeters
ItemPackageDimensions_Length : 2.5908 centimeters
ItemPackageDimensions_Width : 7.7978 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : solder-flux
Manufacturer : BEEYUIHF
Material : 1 Pack
MeasurementSystem : standard
ModelName : Soldering Flux Paste
ModelNumber : US-8403
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : CQ4LF-1.0
PowerSourceType : hand-powered
ProductDescription :
BEEYUIHF No-Clean Soldering Flux Paste, Smooth Flow Solder flux for Soldering, Electronics Flux Paste for PCB/IC/BGA/SMD Repairing DIY (10mL Syringe) #8403
Technical Parameter:
Brand:BEEYUIHF
Type: No-Clean Solder Flux Paste
Gross weight: 0.73oz/20.6g
Net weight: 0.43oz/12g
Shell: 10mL Syringe
Paste color: white
Model:#8403
Welding temperature: 100℃-400℃
Storage environment: Best storage temperature:18℃-25℃,Best storage humidity:75%-85%.
BEEYUIHF #8403 is made of No clean, halogen free, acid free, non-corrosive flux, white paste, good fluidity, moderate viscosity, less residue, less smoke, suitable for cell phone PCB, BGA and PGA and other SMD ball array solder joints rework and ball patching.
How to use electronics flux: wipe the electronic components and their Printed Circuit Board clean before soldering, squeeze the right amount of flux on the surface of the components or wire, heat up the soldering iron to 200 ℃ or more, and then the tin will be melted in the solder. After adding flux, it is very easy to put on the tin, and the structure of the solder joint is very full and strong and bright.
The most prominent role of #8403 flux is to remove oxidation,soldering flux is a kind of chemical substances to promote soldering, have to remove the surface of the solder material oil, remove the oxide film, increase the role of the soldering area. Flux paste also has the role of protecting components and preventing re-oxidation. Flux is an indispensable auxiliary material in soldering and repair, to achieve better soldering and repair results.
#8403 solder flux main function is to reduce the surface tension generated by the contact between the solder and the lead pin metal, enhance the surface wetting force, and enhance the penetration of the organic activator, which is the key role of flux. Flux paste is fine and white, with very little residue, and can achieve the performance
ProductSiteLaunchDate : 2023-07-17T11:18:27.201Z
SafetyDataSheetUrl : http://www.chipquik.com/msds/CQ4LF-1.0.pdf
Size : T4-30G
SkipOffer : 1
SpecificUsesForProduct : Jewellery Soldering
SpecificUsesForProduct1 : Industrial Use
SpecificUsesForProduct2 : Residential Use
Style : Industrial
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UpperTemperatureRating : 600 degrees_fahrenheit