Cart 2 india

Specification
Brand : GEiNNOVA
BulletPoint : 10g Solder paste soldering flux soldering paste soldering oil
BulletPoint1 : Colour:Yellow ;Solid Contents: 55%
BulletPoint2 : Viscosity (Squeeze Test):10 mg/sec. (2bar, needle 0.4mm diameter) ; Halide contents:N/A
BulletPoint3 : Water contents:<0.5% ; Density (at 20°C):0.91 g/cm3
BulletPoint4 : Flash Point (closed crucible):13°C; Ignition Temperature: 425°C
BulletPoint5 : Change of surface resistance DIN 8527:Pass; Corrosion DIN 8527:Pass; Copper mirror test:Pass
CareInstructions : Machine Wash
ExternallyAssignedProductIdentifier1 : 0749771548532
ExternallyAssignedProductIdentifier2 : 749771548532
IncludedComponents : w/plunger & tip
ItemName : 10 g KOLOPASTE NO. 8 ready to use, concentrated rosin flux, in 35cc syringes for manual dispensing
ItemTypeKeyword : solder-flux
Manufacturer : STANNOL
Material : brass
ModelName : GE-KP08
ModelNumber : GE-KP08
NumberOfItems : 1
PartNumber : 749771548532
PowerSourceType : hand_powered
ProductDescription :

Introductions:

Introducing our Soldering Kit with Low Flux and Needle Dispensing Tool, your electronics projects

This kit includes NC 559 ASM Solder Flux, ensuring precise soldering for professional results

The low flux minimizes post-soldering cleanup, saving you and effort

With our needle dispensing tool, you can easily apply solder paste with

Whether you're a hobbyist or a professional, this kit is an essential tool for your soldering needs

Get yours today and experience the difference!

Specifications:

ProductDescription1 : Rosin flux-gel conforming to DIN EN 29454 type 1.1.3.C (DIN 8511 F-SW 32).
ProductDescription2 : Matedexl Kolopaste No. 8 is a ready to use, concentrated rosin flux. It is suitable for repair work on surface mounted devices and soldering operations with soldering irons.
ProductDescription3 : Other available methods of heating to cause re-flow, such as hot air and IR, may be used.
ProductDescription4 : The solder cream is also suitable for soldering large areas of copper,brass and pre-tinned parts and can be applied with a dispenser.
ProductDescription5 : The very low activation causes an excellentinsulation reaction of the flux residues after the soldering process.
ProductSiteLaunchDate : 2023-11-18T01:27:54.573Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1