Cart 2 india

Specification
Brand : Sheicon
BulletPoint : Practice Circuit Board with Parts
BulletPoint1 : 1.1 Lb each Tin Bar. Made of new material,do not add the recovery of tin ,tin slag.This products compliant ROHS.
BulletPoint2 : Good wettability and extension ability, solder joint full light, effectively prevent bridge, icicles,virtual false welding welding phenomenon.
BulletPoint3 : Adding high-effective antioxidant ingredients, strong antioxidant capacity, Tin slag less, reduce energy consumption, reduce unnecessary waste.
BulletPoint4 : Suitable for wave soldering or hand immersion soldering，Welding intensive circuit board, superior performance and high reliability.
BulletPoint5 : ATTENTION: all tin bars are printed with Sn63%A, which is not represent the actual tin content. It is just a mold issue. Please select the actual tin content according to the style option.
ExternallyAssignedProductIdentifier1 : 0708210631075
ExternallyAssignedProductIdentifier2 : 708210631075
ItemForm : Sheet
ItemName : Sheicon 50% Tin, 50% Lead Solder Bar Weight 1.1 Pounds (500g) Style Sn50/Pb50
ItemPackageDimensions_Height : 0.25 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 9 inches
ItemTypeKeyword : solder
Manufacturer : Sheicon
Material : Tin
ModelNumber : SMDPST100
PartNumber : TIN00007
ProductDescription :
The Melting Point of each content of tin bar are as follows

Sn25/Pb75 361.4-510.8°F

Sn30/Pb70 361.4-491°F

Sn35/Pb65 361.4-476.6°F

Sn40/Pb60 361.4-460.4°F

Sn45/Pb55 361.4-440.6°F

Sn50/Pb50 361.4-420.8°F

Sn55/Pb45 361.4-397.4°F

Sn60/Pb40 361.4-374°F

Sn63/Pb37 361.4°F

Sn99.3/Cu0.9 440.6°F

Sn99.9 440.6°F

The Tin content of solder rods are 20-99.9%. Please purchase solder rods with corresponding tin content according to their respective purposes to achieve the effect of use.

Tin content 55-99.9%, for high requirements: welding of high-precision instruments, electronics industry, circuit boards (high requirements), communications, micro-technology, aviation industry, etc.

Tin content 40-50%, for general requirements: welding of home appliances, electrical appliances, meters, circuit boards (general requirements) automotive electrical appliances, general hardware appliances, etc.

Tin content 20-35%, for lower requirements: general mechanical welding, welding of automobile water tanks, light bulbs, cable joints, etc.

The tin bar with the higher tin content, the brighter the tin bar, the easier it is to tin, and the brighter the solder joints.

ProductSiteLaunchDate : 2021-07-12T08:08:58.767Z
SafetyDataSheetUrl : http://www.chipquik.com/msds/SMDPST100.pdf
Size : 1 Pounds
Style : Sn50/Pb50
SupplierDeclaredDgHzRegulation : not_applicable