Cart 2 india

Specification
Brand : MG Chemicals
BulletPoint1 : Meets J-STD-004 / J-STD-006
BulletPoint2 : Non-corrosive and electrically non-conductive flux residue
BulletPoint3 : Standard Flux Core percentage at 2.2 percent
BulletPoint4 : Melting point 361 degree F
BulletPoint5 : 63 Percent tin, 37 percent lead, RA flux core
Color : Orange
CurtainHangingMethod : grommet
CustomerPackageType : Standard Packaging
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Silver
ExteriorFinish3 : Nickel
ExteriorFinish4 : Brass
ExternallyAssignedProductIdentifier : 4962615025259
ExternallyAssignedProductIdentifier1 : 779008488423
ExternallyAssignedProductIdentifier2 : 0779008488423
ExternallyAssignedProductIdentifier3 : 00779008488423
ExternallyAssignedProductIdentifier4 : 0036000362923
ExternallyAssignedProductIdentifier5 : 20036000362927
ExternallyAssignedProductIdentifier6 : 00036000362923
FabricType : Vinyl
HeatingElementType : Terjadition
IncludedComponents : No
ItemDisplayWeight : 0.55 pounds
ItemName : MG Chemicals - 4884-227G 63/37 Rosin Core Leaded Solder, 0.025" Diameter, 1/2 lbs Spool
ItemPackageDimensions_Height : 4.9022 centimeters
ItemPackageDimensions_Length : 3.2004 centimeters
ItemPackageDimensions_Width : 4.9022 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : solder
Manufacturer : MG Chemicals
Material : Tin/Lead
ModelName : Winding Solder
ModelNumber : 4884-227G
NumberOfBoxes : 1
NumberOfItems : 1
Opacity : Light-filtering
PackageLevel : unit
PartNumber : 4884-227G
Pattern : Solid
PowerSourceType : Corded Electric
ProductDescription : * Remove any oil, grease, or other contaminants from the surface to be brazed. * Apply flux to joint by dipping, swabbing or brushing area being brazed. The flux may be used as supplied or diluted. * Apply heat, by torch, induction or other means to area being brazed after flux has been applied to activate the flux. * Feed the braze alloy into the joint, unless a brazing preform is already in place. * Clean flux residues from brazed joint using hot water (60°C ± 5°C / 140°F ± 10°F) for best results. If unavailable, room temperature water may also be used. WARNING: PROTECT yourself and others. Read and understand this information. FUMES AND GASES can be hazardous to your health. HEAT RAYS, (infrared radiation) from flame or hot metal can injure eyes. Before use, read and understand the manufacturer’s instructions, Material Safety Data Sheets (MSDS), and your employer's safety practices. Keep your head out of fumes. Use enough ventilation, exhaust at the flame, or heat source, to keep fumes and gases from your breathing zone and the general area. Wear correct eye, ear, and body protection. See American National Standard Z49.1, Safety in Welding, Cutting, and Allied Processes, published by the American Welding Society, 8669 Doral Blvd., Doral, Florida 33166; OSHA Safety and Health Standards, available from the U.S. Government Office, Washington, DC 20402.
ProductSiteLaunchDate : 2010-03-14T08:00:00-00:00
RecommendedUsesForProduct : Indoor
SafetyDataSheetUrl : https://www.mgchemicals.com/downloads/msds/01%20English%20Can-USA%20SDS/sds-4880-4888.pdf
Seasons : All Season
Size : 1/2 Pound
SpecificUsesForProduct : Indoor welding activities, UV protection, and fume extraction
Style : Pencil
SupplierDeclaredDgHzRegulation : ghs
TargetGender : unisex
Theme : Solid
TopStyle : Grommet
UnitCount : 1
UnspscCode : 23271800
WaterResistanceLevel : water_resistant