Cart 2 india

Specification
Brand : JSP Manufacturing
BulletPoint1 : New Plastic Jumbo Glacier Snow and Ice Roof Guard with Mechanical Fasten Installation Kit to Metal Purlins
BulletPoint2 : Features: 4” wide face plate ~ (3) 3/8” thick supports for added durability and strength ~ Large waffle pattern base surface area allows for a more secure mounting with adhesive.
BulletPoint3 : Measures Approximately: Length: 6-3/4 inches / Width: 4-1/2 inches / Height: 2-3/4 inches ~ Color: Clear ~ Made in USA!
BulletPoint4 : Kit Includes: (10) Jumbo Glacier Snow Guards, (50) 1.5" # 14 Self-tapping Metal Purlin Screws with neoprene washer and (1) Tube of NOVAFLEX Metal Roof Sealant
BulletPoint5 : Fits: Designed for use on metal roofs.
BulletPoint6 : Mechanically Fasten – We recommend using (#14 Roofing screw) 1.5" Metal Purlin screws or 2" Self Tapping Wood Purlin Screws with a sealant around guard base and screw holes to provide a watertight and leak free seal.
BulletPoint7 : Please Note: Each application is unique per snow guard type, please note one tube of sealant should install approximately 6 to 8 large snow guards or approximately 10 to 20 mini snow guards, depending on their design shape and size.
Color : Clear
ItemName : Clear Plastic Glacier 10 Piece Jumbo Snow Guards with Mechanical Fastening Mounting Hardware Kit - Includes 1.5" #14 Self-Tapping Screws with Neoprene Washers for Metal Purlins & (1) Tube of Sealant
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 12 inches
ItemPackageDimensions_Width : 12 inches
ItemTypeKeyword : snow-and-ice-melting-products
ItemTypeName : RFGD Kit
Manufacturer : JSP Manufacturing
ModelName : RFGD-Glacier-Jumbo
ModelNumber : RFGD-KIT-J-10Glacier
NumberOfBoxes : 1
PartNumber : RFGD-KIT-J-10Glacier
PowerSourceType : hand_powered
ProductDescription :
Jumbo Glacier Snow Guards with or without Installation Kit
Made of heavy-duty, strong, durable UV stable polycarbonate material
Prevents damages and injuries from sliding snow and ice buildup.
Protect your property, people, and pets from damage and injury.
Perfect for both DIY homeowners and professional commercial roofers
4" wide face plate
(3) 3/8” thick supports for added durability and strength
Large waffle pattern base surface area allows for a more secure mounting with adhesive.
14 starter point holes to allow for more freedom when deciding the best pattern for screw mounting to your roof.
Made in USA

Multiple Kits Options:
1. (10) Snow Guards Only
2. (10) Snow Guards & (2) tubes of SureBond SB-190 Adhesive
3. (10) Snow Guards & (50) Metal 1.5" Screws & (1) tube of Sealant
4. (10) Snow Guards & (50) Wood 2" Screws & (1) tube of Sealant

Jumbo Glacier Snow Guards with or without Installation Kit
Made of heavy-duty, strong, durable UV stable polycarbonate material
Prevents damages and injuries from sliding snow and ice buildup.
Protect your property, people, and pets from damage and injury.
Perfect for both DIY homeowners and professional commercial roofers
4" wide face plate
(3) 3/8” thick supports for added durability and strength
Large waffle pattern base surface area allows for a more secure mounting with adhesive.
14 starter point holes to allow for more freedom when deciding the best pattern for screw mounting to your roof.
Made in USA

Multiple Kits Options:
1. (10) Snow Guards Only
2. (10) Snow Guards & (2) tubes of SureBond SB-190 Adhesive
3. (10) Snow Guards & (50) Metal 1.5" Screws & (1) tube of Sealant
4. (10) Snow Guards & (50) Wood 2" Screws & (1) tube of Sealant
Product Specifications:
Style: Jumbo Glacier Material: 100% Pure Virgin UV Stable Polycarbonate Manufacturer: JSP Manufacturing Color: Clear
Measures Approximately: see images
Length: 6-3/4 inches Width: 4-1/2 inches Height: 2-3/4 inches
Fits:
Designed for use on metal roofs.

NOT recommended for placement only in isolated areas such as doorways, vents, chimneys, and partial roof sections.
Installation Methods:
Adhesive Fasten – We recommend using SureBond SB-190 adhesive with our snow guards. The installation for adhesive requires 28 days or (672 Hours) at 50 Degrees (F) or above to achieve full cure. Temperatures below 40 Degrees (F) will delay cure time, until temperatures reach 50 Degrees (F) or above to completely cure. Spring and Summer is the best time to install adhesive mounted snow guards to insure 100% cure. Do Not use for Copper or lead coated Copper Roofs
Tip: It is recommended to clean the roof surface with isopropyl alcohol or panel wipes before installation. Please Note: *Each application is unique per snow guard type, please note one tube of adhesive should install approximately 6 to 8 large snow guards or approximately 10 to 20 mini snow guards, depending on the size of their surface design and bonding area. **The recommended adhesive has a release factor that will not cause metal panel damage or roof leaks, so in the event of a release and are loosened or knocked off, they can be remounted to the same spot. Mechanically Fasten – We recommend using (#14 Roofing screw) 1.5" Metal Purlin screws or 2" Self Tapping Wood Purlin Screws with a sealant around guard base and screw holes to provide a watertight and leak free seal. Please Note: Each application is unique per snow guard type, please note one tube of sealant should install approximately 6 to 8 large snow guards or approximately 10 to 20 mini snow guards, depending on their design shape and size.Product Specifications:
Style: Jumbo Glacier Material: 100% Pure Virgin UV Stable Polycarbonate Manufacturer: JSP Manufacturing Color: Clear
Measures Approximately: see images
Length: 6-3/4 inches Width: 4-1/2 inches Height: 2-3/4 inches
Fits:
Designed for use on metal roofs.

NOT recommended for placement only in isolated areas such as doorways, vents, chimneys, and partial roof sections.
Installation Methods:
Adhesive Fasten – We recommend using SureBond SB-190 adhesive with our snow guards. The installation for adhesive requires 28 days or (672 Hours) at 50 Degrees (F) or above to achieve full cure. Temperatures below 40 Degrees (F) will delay cure time, until temperatures reach 50 Degrees (F) or above to completely cure. Spring and Summer is the best time to install adhesive mounted snow guards to insure 100% cure. Do Not use for Copper or lead coated Copper Roofs
Tip: It is recommended to clean the roof surface with isopropyl alcohol or panel wipes before installation. Please Note: *Each application is unique per snow guard type, please note one tube of adhesive should install approximately 6 to 8 large snow guards or approximately 10 to 20 mini snow guards, depending on the size of their surface design and bonding area. **The recommended adhesive has a release factor that will not cause metal panel damage or roof leaks, so in the event of a release and are loosened or knocked off, they can be remounted to the same spot. Mechanically Fasten – We recommend using (#14 Roofing screw) 1.5" Metal Purlin screws or 2" Self Tapping Wood Purlin Screws with a sealant around guard base and screw holes to provide a watertight and leak free seal. Please Note: Each application is unique per snow guard type, please note one tube of sealant should install approximately 6 to 8 large snow guards or approximately 10 to 20 mini snow guards, depending on their design shape and size.
Style : Snow Guards with Metal Screws & Sealant
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1