Cart 2 india

Specification
Brand : 未来工業
BulletPoint : Manufacturer Model: SBW
BulletPoint1 : 【Parameter】Voltage:AC110V 60 HZ; Power:25W; Max Speed: 4000r/min; Time rang:0~60min or without limit; Maximum relative Centrifugal force: 1790×g; Capacity:20ml×6.
BulletPoint2 : 【6 Tubes More Efficency】The centrifuge can hold 20mlX6 tubes one time. But the tubes need to be inserted into the machine symmetrically, it is not allowed to operate the machine asymmetrically.
BulletPoint3 : 【Timing and Speed】Electric Laboratory Centrifuge Machine with two knobsl to control speed and time. The lower speed centrifugal machine with the maximum speed 4000r/min.
BulletPoint4 : 【Wide Appplication】This centrifuge can be used in various fields such as biology, medicine, chemistry, food, education, beauty, life science, etc. It mainly be used for the appraisal radioactivity and separate cell or particle.
BulletPoint5 : 【Excellent Service】 If you have any questions or concerns, please feel free to contact us. It is our policy to provide the best service to our customer
ExternallyAssignedProductIdentifier : 4571144009472
IncludedComponents : No
ItemName : Mirai Industry SBW Slide Box with Base for 2
ItemPackageDimensions_Height : 11.6 centimeters
ItemPackageDimensions_Length : 3.6 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : microscope-slide-holders
Manufacturer : 未来工業(MIRAI)
ModelNumber : SBW
NumberOfItems : 1
PartNumber : SBW
ProductDescription : Features:
Equipped with speed and timer control to meet your requirement
Safe, compact and quiet to use
Include 6pcs centrifuge tubes of 20ml capacity each
Widely used in the laboratory, medical, chemistry and so on

Specification:
Voltage:AC110V 60 HZ;
Power:25W;
Max Speed: 4000r/min;
Time rang:0~60min
Capacity:20ml×6
Maximum relative Centrifugal force: 1790×g

Using Description
1.Put the machine on a level and strong table and keep the woring room clean, dry and ventilated. Indoor tempeture 5-32°is ok。
2.Clean die rotor and container before operating.
3.Put the test tube(with the same weigjt) into the centrifugal hole.
4.Put down the cover of the machine, adjust the timer as you requirement and turn on the power switch.
5.Adjust the speed knob as your requirement.
6.The motor iwll automatically stop supplying the electricity if oprn the cover during the working time.
7.After finishing the work, adjust file speed knob to file lowest position and turn the timer to 0, and then cut off the power supply.
8.Clean the container and rotor, then put dowen the cover.
ProductSiteLaunchDate : 2014-09-27T02:01:04.422Z
Style : 2
WebsiteShippingWeight : 0.04 kilograms