Cart 2 india

Specification
Brand : CONFAST
BulletPoint1 : VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
BulletPoint2 : 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
BulletPoint3 : PRE-ASSEMBLED - Ready to install no separate parts required
BulletPoint4 : ALL STEEL PARTS - Heavy duty for the most demanding jobs
BulletPoint5 : ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
Color : Silver
CompatibleGrooveDiameter : 0.3125 inches
CustomerPackageType : Standard Packaging
DriveSystem : External Hex
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 0749273242716
ExternallyAssignedProductIdentifier2 : 749273242716
ExternallyAssignedProductIdentifier3 : 00044315757716
FinishType : Zinc
GradeRating : Grade 304
ItemName : CONFAST 1/4" x 4" Flat Sleeve Anchor Zinc Plated (100 per Box)
ItemPackageDimensions_Height : 3.5 inches
ItemPackageDimensions_Length : 6.5 inches
ItemPackageDimensions_Width : 4.5 inches
ItemPackageQuantity : 1
ItemShape : Flat
ItemTypeKeyword : sleeve-anchors
Manufacturer : CONFAST
Material : Carbon Steel Zinc Plated
Material1 : Stainless Steel
Material2 : Carbon
Material3 : Zinc
MaximumShearStrength : 840
MeasurementSystem : inch
MetalType1 : Zinc
MetalType2 : Stainless Steel
ModelNumber : SL50600H
NumberOfItems : 100
NumberOfPieces : 100
PartNumber : SAF144
ProductDescription : Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Flat Countersunk head and is designed to prevent the head from protruding above the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 1/4".

Length Anchor
The length of the anchor is 4"
Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 3". This will ensure that the minimum embedment of 1" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.
ProductSiteLaunchDate : 2017-06-08T07:00:00.000Z
Size : One Size
SpecificUsesForProduct : Concrete
SupplierDeclaredDgHzRegulation : unknown
UnspscCode : 31160000