Cart 2 india

Specification
Brand : Shorpioen
BulletPoint1 : A device for giving stability to one part of a structure by making it fast to another consisting of (A) a threaded stud with a conical end flared outward; (B) a hollow, cylindrical dilating sleeve assembled over the stud and positioned against the minor diameter of the cone; (C) a washer and hex nut assembled at the end opposite the cone.
BulletPoint2 : The anchor works by expanding against the material in which it is embedded. When the hex nut is tightened the conical end is pulled into the dilating sleeve pushing it outward 360° around the anchor into the masonry. They are designed to be used in solid
BulletPoint3 : Another is that the length of the sleeve induces less stress on the substrate than does a wedge anchor. It is well-suited for permanently anchoring heavy equipment to concrete.
BulletPoint4 : Threaded Bolt: AISI 1010 - 1018 cold rolled steel -- Sleeve: AISI 1008 cold rolled steel -- Nut: Shall be made from a low carbon steel which conforms to the following chemical composition requirements: Carbon- 0.58% maximum; Phosphorus- 0.13% maximum; Sul
BulletPoint5 : Threaded Bolt: 18-8 stainless steel -- Sleeve: Type 304 stainless steel -- Nut: Type 304 stainless steel -- Washer: 18-8 stainless steel
ItemName : 3/8X1 7/8 Hex nut Sleeve Anchor 18 8 Stainless Steel (Pack Qty 50) BC-3730ASLH188 by Shorpioen
ItemPackageQuantity : 50
ItemTypeKeyword : sleeve-anchors
Manufacturer : Shorpioen LLC
Material : 18-8 Stainless
ModelNumber : BC-3730ASLH188
NumberOfItems : 50
PartNumber : BC-3730ASLH188
ProductDescription : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot. A device for giving stability to one part of a structure by making it fast to another consisting of (A) a threaded stud with a conical end flared outward; (B) a hollow, cylindrical dilating sleeve assembled over the stud and positioned against the minor diameter of the cone; (C) a washer and hex nut assembled at the end opposite the cone.. The anchor works by expanding against the material in which it is embedded. When the hex nut is tightened the conical end is pulled into the dilating sleeve pushing it outward 360° around the anchor into the masonry. They are designed to be used in solid or hollow masonry, including cinder block, brick, marble and concrete. One advantage of the sleeve anchor is that it can be removed after it's been installed.. Another is that the length of the sleeve induces less stress on the substrate than does a wedge anchor. It is well-suited for permanently anchoring heavy equipment to concrete.. Threaded Bolt: AISI 1010 - 1018 cold rolled steel -- Sleeve: AISI 1008 cold rolled steel -- Nut: Shall be made from a low carbon steel which conforms to the following chemical composition requirements: Carbon- 0.58% maximum; Phosphorus- 0.13% maximum; Sulfur- 0.23% maximum -- Washer: AISI 1008 - 1010 cold rolled steel.. Threaded Bolt: 18-8 stainless steel -- Sleeve: Type 304 stainless steel -- Nut: Type 304 stainless steel -- Washer: 18-8 stainless steel.
ProductSiteLaunchDate : 2016-11-17T16:06:00.986Z
Size : 3/8X1 7/8
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable