Cart 2 india

Specification
Brand : CANADUINO
BulletPoint1 : Wemos D1 R32 is Much faster and a lot cheaper than Arduino WiFi
BulletPoint2 : ESP32 Wi-Fi + Bluetooth + BLE and 4MB Flash Memory
BulletPoint3 : Arduino UNO Form Factor to use with Arduino Shields
BulletPoint4 : This is a 3.3V Device. Input Voltage 5 to 12V
BulletPoint5 : Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
BulletPoint6 : Onboard USB Type-C port, 22 × GPIO pins allows flexibly configuring pin functions
CompatibleDevices : Arduino Shields, General External Devices
CompatibleDevices1 : ESP32-C6-Zero
CompatibleDevices2 : ESP32-C6-Zero
ConnectivityTechnology1 : Wi-Fi
ConnectivityTechnology2 : Bluetooth
ConnectivityTechnology3 : Ethernet
ExternallyAssignedProductIdentifier : 4260474033430
IncludedComponents : Main board, Arduino Shield headers
ItemName : WEMOS TTgo D1 R32 ESPDuino-32 Compatible WiFi Bluetooth BLE with ESP32
ItemPackageDimensions_Height : 15.2 centimeters
ItemPackageDimensions_Length : 1.9 centimeters
ItemPackageDimensions_Width : 11.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : single-board-computers
Manufacturer : UNIVERSAL-SOLDER
MemoryStorageCapacity : 4 MB
ModelName : D1 R32
ModelNumber : N.A.
NumberOfItems : 1
OperatingSystem : Linux
OperatingSystem1 : Linux
OperatingSystem2 : FreeRTOS
PartNumber : N.A.
ProcessorCount : 2
ProductDescription :

ESP32-WROOM-32 (ESP-WROOM-32) is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. At the core of this module is the ESP32-D0WDQ6 chip. The chip embedded is designed to be scalable and adaptive.

There are two CPU cores that can be individually controlled, and the clock frequency is adjustable from 80 MHz to 240 MHz. The user may also power off the CPU and make use of the low-power co-processor to constantly monitor the peripherals for changes or crossing of thresholds.

ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C. The integration of Bluetooth, Bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted and that the module is future proof: using Wi-Fi allows a large physical range and direct connection to the internet through a Wi-Fi router while using Bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection.

The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery-powered and wearable electronics applications.

ESP32 supports a data rate of up to 150 Mbps, and 20.5 dBm output power at the antenna to ensure the widest physical range. As such the chip does offer industry-leading specifications and the best performance for electronic integration, range, power consumption, and connectivity. ESP32-D0WDQ6 contains two low-power Xtensa 32-bit LX6 microprocessors.

The internal memory includes:
– 448 kB of ROM for booting and core functions
– 520 kB (8 kB RTC FAST Memory included) of on-chip SRAM for data and instruction
– 8 kB of SRAM in RTC, which is called RTC FAST Memory and can be used for data storage; it is accessed by th
ProductSiteLaunchDate : 2019-02-23T23:30:20.182Z
SupplierDeclaredDgHzRegulation : not_applicable
TotalUsbPorts : 2
UnspscCode : 43211500
WirelessCommStandard : radio_frequency