Cart 2 india

Specification
Brand : SANXIXING
BulletPoint1 : ESP32-S3-DevKitC-1-N16R8 SPI voltage: 3.3 V, ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1
BulletPoint2 : Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC on a breadboard
BulletPoint3 : The ESP32-S3-DevKitC development board equipped with ESP32-S3-DevKitC-1-N16R8, a general-purpose MCU module.
BulletPoint4 : ESP32-S3-WROOM-1-N16R8 cable can be used: USB Type A to Type-C cable or CC cable Note the distinction between the commonly used USB A port to Type-C cable that can only be charged, which cannot be used for communication
BulletPoint5 : USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended) Package include:3pcs ESP32-S3 and 1pc x 50CM USB Type-C Cable
CompatibleDevices : Devices with WiFi and/or Bluetooth connectivity
ConnectivityTechnology : USB
ExternallyAssignedProductIdentifier1 : 717181878181
ExternallyAssignedProductIdentifier2 : 0717181878181
IncludedComponents1 : 3pcs ESP32 S3 Development Boards
IncludedComponents2 : 1pc 50CM USB Type-C Cable
ItemName : SANXIXING 3PCS ESP32 S3 Development Board 2.4G WiFi BT Module Internet of Things ESP32-S3-WROOM-1 N16R8 MCU 44Pin 8M PSRAM with 1pc 50CM Type-C Cable Set
ItemPackageDimensions_Height : 15.0114 centimeters
ItemPackageDimensions_Length : 3.9116 centimeters
ItemPackageDimensions_Width : 10.2108 centimeters
ItemTypeKeyword : single-board-computers
Manufacturer : SANXIXING
MemoryStorageCapacity : 8 MB
ModelName : ESP32 S3 Development Board
OperatingSystem : FreeRTOS
ProcessorCount : 1
ProductDescription : 3PCS ESP32 S3 Development Board Module Internet of Things ESP32-S3 N16R8 MCU 44Pin 8M PSRAM with 1pc 50CM Type-C Cable ESP32S3 Set
Hardware Setup:
Connect the board with the computer using USB-to-UART Port or ESP32-S3 USB Port. In subsequent steps, USB-to-UART Port will be used by default.
Software Setup:
Please proceed to Get Started, where Section Installation will quickly help you set up the development environment and then flash an application example onto your board.
Package include:
3pcs x ESP32-S3-DevKit C Board + 1pc x 50CM USB Type-C Cable.

ProductSiteLaunchDate : 2024-07-24T07:48:26.581Z
SupplierDeclaredDgHzRegulation : other
TotalUsbPorts : 2
UnspscCode : 43201500
WarrantyDescription : 1 Year
WirelessCommStandard : bluetooth