Cart 2 india

Specification
AspectRatio : 1.77:1
BatteriesIncluded : 1
Brand : KEYESTUDIO
BulletPoint1 : Specially researched and developed this motor driver breakout board to facilitate the micro bit to drive DC motor.
BulletPoint10 : Power Supply and stand: A high quality, 30W power supply and Solo Satoshi stand is included with every Bitaxe Gamma sold!
BulletPoint2 : Four motor control modes: Forward/Reverse /Brake /Stop. Access to 3Pin headers connection.
BulletPoint3 : Integrated with 3.3V and 5V voltage-regulator chip. Comes with a serial communication port for BT module.
BulletPoint4 : EXCELLENT QUALITY: solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, and protected in a beautiful box.
BulletPoint5 : Up to FCC and CE Standard: made from environmentally friendly components and materials, as well as environmentally friendly production technology, it is really safe.
BulletPoint6 : Open-Source: The Bitaxe Gamma is designed to be open-source, which means that the community can contribute to its development and improvement.
BulletPoint7 : OLED Screen: Your Bitaxe will come with a 0.91" SSD1306 OLED I2C display module, which allows you to monitor your mining progress in real-time. The devices screen will now be soldered on for a flawless operating experience.
BulletPoint8 : Setup: Your device will come with a QR code which links you to a setup guide, making setup a breeze. Plug in the power cable, connect to Wi-Fi, change a few settings, and you're ready to go!
BulletPoint9 : Fan: Features a 40x40mm heatsink and a 5V fan, which helps to keep the miner cool and quiet.
Color : Black and Gold
CompatibleDevices : microbit board
CompatibleDevices1 : Computer
CompatibleDevices2 : Laptop
CompatibleDevices3 : Cellphone
ConnectivityProtocol : BACnet MS/TP
ConnectivityTechnology : USB
ConnectorGender : Male-to-Female
ConnectorType : Barrel Jack
ControllerType : Push Button
ControlMethod : touch
CoolingMethod : Air
CustomerPackageType : FFP
ExternallyAssignedProductIdentifier : 6959420923342
ExternallyAssignedProductIdentifier1 : 606184533527
ExternallyAssignedProductIdentifier2 : 0606184533527
HardwareInterface1 : usb3.0
HardwareInterface2 : hdmi
HardwareInterface3 : usb
HardwareInterface4 : micro_hdmi
HasColorScreen : 1
ImageAspectRatio : 16:9
ImageBrightness : 500 candela
ImageContrastRatio : 1500:1
IncludedComponents : Built-in speaker and interface for external speaker
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
InputVoltage : 9 volts
ItemName : KEYESTUDIO Microbit Motor Driver HAT Breakout Board DRV8833 for BBC Micro bit with Edge Connector
ItemPackageDimensions_Height : 11.0998 centimeters
ItemPackageDimensions_Length : 2.8956 centimeters
ItemPackageDimensions_Width : 8.7122 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : single-board-computers
Manufacturer : keyes
Material : Alloy Steel
MaxHorizontalResolution : 1024
ModelName : DRV8833
ModelNumber : Bitaxe Gamma
MountingType : Wall Mount
NativeResolution : 1024x600
NumberOfContacts : 40
NumberOfItems : 1
NumberOfPins : 15
NumberOfPoles : 40
OperatingSystem : MicroPython
OutputVoltage : 5 volts
OutputWattage : 18 watts
PartNumber : KS0308
PowerSupplyDesign : Non-Modular
ProcessorCount : 1
ProductDescription : Introduction
In order to facilitate the micro bit to drive DC motor, we specially developed this breakout board.
It uses a DRV8833CPWP chip which outputs the maximum 700mA current
There are 4 motor control modes: Forward / Reverse / Brake / Stop. And PWM supporting frequency is up to 100 kHz.
For wiring, the board breaks out all the pins with the 3PIN interface, so you can connect other sensors to the board using 3pin wire.
At the same time, a 3.3V and 5V voltage-regulated chip is integrated into the breakout board, which leads to a 3.3V and 5V power output interface.
The board also comes with a serial communication port to facilitate the connection of BT module.

Details display, wiring diagram and test code are offered on keyestudio wiki page.

Parameters
Input Voltage：DC 5-10.8V
Drive Partial Working Current：≤700mA

Features
Four motor control modes: Forward/Reverse /Brake /Stop.
Access to 3Pin headers connection
Integrated with 3.3V and 5V voltage-regulator chip
Comes with serial port communication pins

Packaging List
1 * KEYESTUDIO Motor Drive Breakout Board
ProductSiteLaunchDate : 2018-03-26T07:00:00.000Z
RealAngleOfView : 170 degrees
RecommendedUsesForProduct : Extension cable for Raspberry Pi camera, Other applications
RefreshRate : 60 hertz
Resolution : SVGA Wide
ScreenSurfaceDescription : Glossy
Size : Small
SpecificUsesForProduct : Business
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TemperatureControlType : Manual
TotalHdmiPorts : 2
TotalPowerOutlets : 4
TotalUsbPorts : 1
TotalVideoOutPorts : 2
UnitCount : 1
UnspscCode : 43200000
ViewingAngle : 178 degrees
Voltage : 220 volts
Wattage : 18 watts
WirelessCommStandard : bluetooth