Cart 2 india

Specification
Brand : JZK
BulletPoint1 : Double BTS7960 large current H bridge driver, limit up to 43A large current output, with a strong drive and brake effects.
BulletPoint2 : With the microcontroller 5V isolation, effective protection of single-chip; Using 74HC244 chip to effectively isolate the microcontroller and motor drive.
BulletPoint3 : Can achieve the motor forward rotation and reversal rotation. Two PWM input up to 25kHZ frequency.
BulletPoint4 : Overcurrent and overheating error signal output; Over temperature, overvoltage, undervoltage, overcurrent protection, short circuit protection.
BulletPoint5 : Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; The supply voltage is 5.5V to 27V.
Color : Blue
CompatibleDevices : Arduino, Microcontrollers (e.g., 51 microcontroller)
ConnectivityTechnology : USB, Wi-Fi (5 GHz)
ConnectivityTechnology1 : Bluetooth
ConnectivityTechnology2 : Wi-Fi
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 701715432475
ExternallyAssignedProductIdentifier2 : 0701715432475
IncludedComponents1 : pcb board
IncludedComponents2 : pin header
IncludedComponents3 : 1 x Touch Pen ( Color: pink or white or black or green)
IncludedComponents4 : 1 x 4Pin Connector Cable
IncludedComponents5 : 1 x Packaging box for display
ItemName : JZK BTS7960B 43A High Power Double DC Stepper Motor Driver Module Board H-Bridge PWM for Smart Car
ItemPackageDimensions_Height : 12.3 centimeters
ItemPackageDimensions_Length : 5.2 centimeters
ItemPackageDimensions_Width : 10.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : single-board-computers
Manufacturer : JZK-M466434U
MemoryStorageCapacity : 448 KB
ModelName : Teensy 4.1
ModelNumber : QMseller 116
NumberOfBoxes : 1
NumberOfItems : 1
OperatingSystem : Linux (version not specified)
PartNumber : 16233
ProcessorCount : 1
ProductDescription : Wiring Instructions:
A single module can drive a 8x8 dot matrix common cathode
Operating Voltage: 5V
Dimensions: 12.8X3.3X1.3cm(5.04X1.3X0.51in)
Fixing screws with 64 holes with a diameter 3mm
Module with input and output interfaces, support for cascading multiple modules
The left side of the module to the input port, the right to an output port
When the control of a single module, simply input port connected to CPU
When a plurality of cascaded modules, input and output termination CPU, an input terminal of the second output end of the first module a module, the first two modules of the input terminal of the three termination modules, and so on
51 microcontrollers, for example: VCC 5V GND GND
DIN P2.2
CS P2.1
CLK P2.0

Package list:
2x MAX7219 Dot Matrix Module 4-in-1
2x 20cm DuPont line 5pin

ProductSiteLaunchDate : 2021-09-29T02:01:53.591Z
Size : 2.8"
SupplierDeclaredDgHzRegulation : not_applicable
TotalUsbPorts : 2
UnspscCode : 26111500
Voltage : 6 volts_of_direct_current
WarrantyDescription : returnable
WirelessCommStandard : 5_ghz_radio_frequency