Cart 2 india

Specification
Brand : FREENOVE
BulletPoint1 : Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
BulletPoint2 : Comes with 128GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
BulletPoint3 : Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
BulletPoint4 : Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
BulletPoint5 : Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
BulletPoint6 : Out of the box: The factory eMMC has built-in jetpack466 dtb; it is supported right out of the box. Please note: The current Jetson Nano 4GB Sub kit nano Developer Kit latest dtb is jetpack466, which is also the final version of the dtb it will work with. It does not support the latest dtb SDK from N-vi-dia official.
BulletPoint7 : Do Not Upgrade: Upgrading will cause some jetpack versions to be inconsistent, and the boot information on the eMMC may not match that on the sd card, resulting in errors or failure to boot the device. SUB Kit Nano also supports jetpack461, jetpack451, jetpack4.4, jetpack4.6 sdcard dtb.
BulletPoint8 : In the Box: 1 x Jetson Nano Module with Cooling Fan and Reference Carrier Board (SUB Kit Nano). You can click ''WayPonDEV'' and ask a question.
Color : V2 with 128GB SSD
CompatibleDevices : Raspberry Pi 5
ConnectivityTechnology : Ethernet
ConnectivityTechnology1 : USB
ConnectivityTechnology2 : Ethernet
ConnectivityTechnology3 : HDMI
CoolingMethod : Air
ExternallyAssignedProductIdentifier1 : 0701715455696
ExternallyAssignedProductIdentifier2 : 701715455696
HardwarePlatform : Arduino
IncludedComponents : board
ItemName : Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (with 128GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
ItemPackageDimensions_Height : 2.5 centimeters
ItemPackageDimensions_Length : 12.5 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : single-board-computers
Manufacturer : Freenove
Material : Metal
MemoryStorageCapacity : 128 GB
ModelName : Freenove M.2 NVMe Adapter V2
ModelNumber : FNK0098K
NumberOfItems : 1
OperatingSystem : Linux
OperatingSystem1 : Linux
OperatingSystem2 : Ubuntu18.04
PartNumber : FNK0098K
ProcessorCount : 1
ProductDescription : Important Notes:

This product is only compatible with Raspberry Pi 5.

Purchase Options:

This kit has several purchasing options.
This option includes SSD, other options do not include or include different capacities.

Overview:

This adapter can boost your system to an amazing speed by upgrading memory card to SSD.
Just tighten the screws and connect the ribbon cable to install it on the top or bottom.

We provide free technical support to help you with any questions and problems.

Compatible Models:

* Raspberry Pi 5

(Note: NOT compatible with any other models.)

Tutorial:

Comes with detailed tutorial to show how to use. (Download needed, no paper tutorial.)
The download link can be found on the product box.

Package Includes:

1 x Adapter board
1 x Ribbon cable
1 x SSD
6 x M2.5*3 screw
10 x M2.5*8 standoff
1 x Cross screwdriver

ProductSiteLaunchDate : 2025-04-02T08:33:52.067Z
Size : 100mm x 80mm x29mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TotalUsbPorts : 4
UnspscCode : 43201830
WarrantyDescription : 1
WirelessCommStandard : 802_11_B