Cart 2 india

Specification
Brand : EC Buying
BulletPoint1 : Note: This test board is only applicable to ESP32-CAM development boards without reset pins. Not applicable to ESP32-CAM development boards with GND/R markings, as the bow | foot will be connected to the GND of the motherboard, causing the device to remain in a reset state and unable to successfully burn the program
BulletPoint2 : Unlock the full potential of your ESP32-CAM with our Development Board Test Board, featuring seamless integration for easy programming via the USB Type-C to Serial Port. Enjoy hassle-free connections without the need for complex wiring
BulletPoint3 : Enhance your projects with the OV2640 Camera Module included in our ESP32-CAM Development Board, perfect for applications needing high-resolution imaging and video capabilities alongside robust WIFI and Bluetooth connectivity
BulletPoint4 : Streamline your development process with our test board’s plug-and-play design, specifically tailored for the ESP32-CAM. It eliminates the need for a separate reset button by smartly including an IO0 switch and making setup and programming as straightforward as possible
BulletPoint5 : Experience lightning-fast data transfers and easy firmware updates with the Type-C interface of our ESP32-CAM Development Board. Its user-friendly design ensures you can start your projects quickly, with minimal downtime and maximum efficiency; Our board not only serves as a dedicated programming platform for the ESP32-CAM but can also be used as a general USB to 3.3V TTL Serial Port tool when the camera module is not installed, offering versatile functionality for all your tech projects
CompatibleDevices : ESP32-CAM, Computers (via USB Type-C), Microcontrollers (ESP32-CAM)
ConnectivityTechnology1 : Wi-Fi
ConnectivityTechnology2 : USB
ItemName : EC Buying 2Pcs ESP32-CAM Development Board Test Board WiFi OV2640 Camera Module Serial Port Downloader Type-C to Serial Port
ItemPackageDimensions_Height : 17.1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 11.7 centimeters
ItemTypeKeyword : single-board-computers
Manufacturer : EC Buying
NumberOfItems : 2
OperatingSystem : FreeRTOS
ProcessorCount : 2
ProductDescription : Note: This test board is only applicable to ESP32-CAM development boards without reset pins. Not applicable to ESP32-CAM development boards with GND/R markings, as the bow | foot will be connected to the GND of the motherboard, causing the device to remain in a reset state and unable to successfully burn the program.

This module serves as the program download motherboard for the ESP32-CAM WIFI camera module, eliminating the hassle of wiring. Simply plug the ESP32-CAM into the motherboard and connect the USB Type-C cable. The bottom plate leads out all the pins of the ESP32-CAM module, as well as external wires. It can also be used as a regular USB to 3.3V TTL serial port tool without inserting ESP32-CAM.
Usage:
Before use, install the CH340 USB to TTL serial port driver program on the computer and recognize the COM port in the device management. As the ESP32-CAM module integrates a reset button, there is no additional reset button designed on this motherboard, and the IO0 pin is introduced to the switch. When downloading the program, simply hold down the button and do not release it, which is equivalent to pulling the IO0 pin low. Then, press the reset button on the ESP32-CAM module again to enter the download mode. Click the download option on the download software, and wait for the program to download. At last, release the I00 button, press the reset button, and the downloaded program can run
ProductSiteLaunchDate : 2024-06-03T09:39:37.274Z
SupplierDeclaredDgHzRegulation : not_applicable
TotalUsbPorts : 1
UnspscCode : 43201500
WirelessCommStandard : bluetooth