Cart 2 india

Specification
Brand : Adafruit
BulletPoint1 : Same size, form-factor, and pin-out as Seeed Xiao
BulletPoint2 : USB Type C connector - If you have only Micro B cables, this adapter will come in handy!
BulletPoint3 : ATSAMD21E18 32-bit Cortex M0+ - 48 MHz 32 bit processor with 256KB Flash and 32 KB RAM
BulletPoint4 : Built in RGB NeoPixel LED
BulletPoint5 : 11 GPIO pins:
BulletPoint6 : 【Note】Power adapter needs to be purchased separately
Color : White Full Kit
CompatibleDevices : SparkFun Qwiic boards, Seeed Grove I2C boards
CompatibleDevices1 : PCs
CompatibleDevices2 : Desktop Computers
ConnectivityTechnology : USB, UART, Ethernet, Wi-Fi
ConnectivityTechnology1 : USB
ConnectivityTechnology2 : GPIO
ConnectivityTechnology3 : I2C
ExternallyAssignedProductIdentifier1 : 652733689504
ExternallyAssignedProductIdentifier2 : 0652733689504
GpsrSafetyAttestation : 1
HardwarePlatform : Arduino
IncludedComponents : RGB NeoPixel LED, Reset switch
ItemName : Adafruit QT Py - SAMD21 Dev Board with Stemma QT Ada 4600
ItemPackageDimensions_Height : 10.1 centimeters
ItemPackageDimensions_Length : 2.5 centimeters
ItemPackageDimensions_Width : 3.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : single-board-computers
Manufacturer : Adafruit
MemoryStorageCapacity : 256 KB
ModelName : QT Py
ModelNumber : 4600
NumberOfItems : 1
OperatingSystem : Cross-platform (Arduino, CircuitPython)
PartNumber : 4600
ProcessorCount : 1
ProductDescription : What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with our favorite lil chip, the SAMD21 (as made famous in our GEMMA M0 and Trinket M0 boards). This time it comes with our favorite connector - the STEMMA QT, a chainable I2C port that can be used with any of our STEMMA QT sensors and accessories. OLEDs! Inertial Measurment Units! Sensors a-plenty. All plug-and-play thanks to the innovative chainable design: SparkFun Qwiic-compatible STEMMA QT connectors for the I2C bus so you don't even need to solder! Just plug in a compatible cable and attach it to your MCU of choice, and you’re ready to load up some software and measure some light. Use any SparkFun Qwiic boards! Seeed Grove I2C boards will also work with this adapter cable. Pinout and shape is Seeed Xiao compatible, with castellated pads so you can solder it flat to a PCB. In addition to the QT connector, we also added an RGB NeoPixel (with controllable power pin to allow for ultra-low-power usage), and a reset button (great for restarting your program, or entering the bootloader) Runs Arduino like a dream, and can be used for basic CircuitPython projects. For more advanced usage like datalogging or file storage, solder an SOIC SPI flash chip onto the bottom pads, Same size, form-factor, and pin-out as Seeed Xiao USB Type C connector - If you have only Micro B cables, this adapter will come in handy! ATSAMD21E18 32-bit Cortex M0+ - 48 MHz 32 bit processor with 256KB Flash and 32 KB RAM Native USB supported by every OS - can be used in Arduino or CircuitPython as USB serial console, MIDI, Keyboard/Mouse HID, even a little disk drive for storing Python scripts. Can be used with Arduino IDE or CircuitPython Built in RGB NeoPixel LED 11 GPIO pins: True analog output on one I/O pin - can be used to play 10-bit quality audio clips in Arduino (CircuitPython does not have storage for audio clips) 9 x 12-bit analog inputs (SDA/SCL do not have analog inputs) 1 x Optional AREF on A1 9 x PWM output
ProductSiteLaunchDate : 2021-09-23T19:34:56.098Z
ShipsGlobally : 1
Size : 2Gbit 256MB DDR3 RAM
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
TotalUsbPorts : 1
UnspscCode : 43201400
WarrantyDescription : 2 Year
WirelessCommStandard : bluetooth