Cart 2 india

Specification
Brand : Shutao
BulletPoint1 : 3V 1 channel relay interface board support photocoupler isolation control,has the output signal indicator,the signal input port can connect SCM IO port, high level signal drive
BulletPoint2 : Relay board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO, support dual power supply input ensure high anti-interference ability,high reliability of photoelectric isolation protection
BulletPoint3 : 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. with diode continuous flow protection,response time is less than 20 milliseconds,long life of relay can be absorbed 100,000 times continuously.
BulletPoint4 : You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using.
BulletPoint5 : Relay Module: SRD-DC03V-SL-C; Channel: 1 channel; Working Voltage: DC 3-3.3V; Compatible Load: 10A 250VAC / 10A 30VDC; Single Socket Length: 7.5mm
CompatibleDevices : Raspberry Pi, Arduino
CompatibleProcessorTypes : Raspberry Pi BCM2835, BCM2836, BCM2837, BCM2711, Arduino Atmel AVR, Arduino ESP32
ConnectorType : Rotary Crimping Terminals
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier1 : 701715510838
ExternallyAssignedProductIdentifier2 : 0701715510838
GraphicsCardInterface : integrated
ItemName : 10Pcs 1 Channel DC 3V/3.3V Relay Power Switch Module with Optocoupler Relay Module Isolated Drive Control Board for IOT ESP8266 Microcontrollers Development Board 3v Logic Level Boards
ItemPackageDimensions_Height : 18.3 centimeters
ItemPackageDimensions_Length : 3.4 centimeters
ItemPackageDimensions_Width : 10.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : single-board-computers
MainPowerConnectorType : DC Barrel Jack or similar
Manufacturer : Shutao
Material : Copper
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 250 volts
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
MemoryClockSpeed : 2666 MHz
MemoryStorageCapacity : 16 GB
MinimumSwitchingVoltage : 250 volts
ModelName : RGB Full-Color LED Matrix Panel
ModelNumber : 13384-1
MountingType : Socket Mount
NumberOfBoxes : 1
NumberOfPorts : 3
OperationMode : Automatic
PartNumber : 13384-1
Platform : linux
ProductDescription : Specification:
Channel: 1 channel
Control signal: TTL
Work voltage: DC 3V/3.3V
Main chip: EL817, SRD-DC03V-SL-C
Compatible Load:10A 250VAC, 10A 30VDC
Response time :Less than 20 milliseconds
Working Current: 65mA
Trigger Current: 3mA
Load Current: 10A max
Single Socket Length: 7.5mm
Response Time: <20ms

The relay module has the output signal indicator light indication
The signal input port can connect SCM IO port, high level signal drive
Dual power supply design with anti-interference ability and high reliability of photoelectric isolation protection
With diode continuous flow protection
Response time is less than 20 milliseconds
Long life of relay can be absorbed 100,000 times continuously
The external connection uses the Rotary crimping terminal, causes the wiring to be more solid

Power interface:
VCC: positive pole of power supply (3v/3.3v)
GND: connect to the negative pole of the power supply
IN: high level control relay suction

Load interface:
NO: normally open interface of the relay. The relay is suspended before suction and shorted with COM after suction
COM: common interface of relay
NC: normally closed interface of relay, short connection between relay and COM before suction and suspension after suction

Note:
If you're switching high voltages, be very careful handling this device.
The terminal block screws, in particular, are at full controlled voltages. Turn off all power off before making changes.

Package include:
10 x1 channel 3v relay board with optocoupler

ProductSiteLaunchDate : 2022-03-23T09:00:52.102Z
SupplierDeclaredDgHzRegulation : not_applicable
SystemBusStandardSupported : SATA 2
UnspscCode : 39122200
Voltage : 5 volts
Wattage : 138 milliwatts