Cart 2 india

Specification
Brand : Tenax
BulletPoint1 : Dripless, Non-sag Consistency
BulletPoint2 : Non-yellowing
BulletPoint3 : Ultra Violet Light Stability
BulletPoint4 : Low Exotherm
BulletPoint5 : Low Shrink
Color : Violet
CompatibleMaterial1 : Glass
CompatibleMaterial2 : Stone
ExternallyAssignedProductIdentifier1 : 0614042420377
ExternallyAssignedProductIdentifier2 : 614042420377
IncludedComponents : ...
ItemForm : Gel
ItemName : Lemon Chiffon (GB413) Multibond 250 ML Glue Cartridges - 2 Pack
ItemPackageDimensions_Height : 10 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : silicone-caulk
ItemVolume : 250 milliliters
LiquidVolume : 10.1 fluid_ounces
Manufacturer : Tenax
Material : Porcelain,Resin,Sintered
ModelName : ....
ModelNumber : 18542
NumberOfItems : 6
PartNumber : 18542
ProductDescription : Lemon Chiffon (GB413) Multibond 250 ML Glue Cartridges - 2 Pack

This is a two-pack of the Multibond 250 ML Glue Cartridge and this is just what you need. These Multibond 250 ML cartridges seam adhesive for porcelain, engineered stone, marble, quartz, and natural stone. Multibond adhesives are a two-part methacrylate with the following characteristics: Super flexibility; Dripless, Non-sag Consistency; Low Shrink; Low Exotherm; Ultra Violet Light Stability; Non-yellowing. Multibond is a hard surfacing adhesive designed for the nearly seamless bonding of the following materials: Porcelain; Sintered Stone; Glass; Travertine; Limestone; Engineered Stone; Marble; Quartz; Natural Stone Products. Combined at a ratio of 10:1 (10 parts resin, one part activator), Multibond adhesives have a working time of 10-15 minutes, with a 5 to 10 minute de-roping time, and achieve nearly 90% of its ultimate strength, stiffness, and toughness as well as the ability to bond very strongly to a wide variety of hard surface or inorganic materials. Four FREE tips are provided for you to dispense the product.

When combined with the proper use of an adhesion promoter surface cleaner/activator, Multibond adhesives provide high strength bonds to virtually any stone, engineered stone, quartz and granite products, including porcelain, sintered stone, and glass. With the use of an adhesion promoter, stone fabricators can bond successfully to wet stone, although bonding underwater is not permitted or recommended. Multibond adhesives permit fabricators the opportunity to apply the adhesive to vertical surfaces, as well as horizontal surfaces. There is no dripping and upon gelation. Multibond glue gives the fabricator an extended window (5-10 minutes) to de-rope. The finished seam is clean because trimming the excess glue is easier. Using a single bladed straight edge razor blade to remove the excess can be done without ripping the adhesive out of the joint or damaging the surface of the stone.
ProductSiteLaunchDate : 2022-04-08T20:54:38.269Z
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation1 : Window
SurfaceRecommendation2 : Door
UnitCount : 16.9
UnspscCode : 31201600
WaterResistanceLevel : waterproof