Specification Brand : JMT BulletPoint1 : Signal Booster Usage: It is mainly solved in urban villages, basements, elevators, garages, villas, offices, warehouses and some other blind areas where signals cannot reach. BulletPoint2 : Frequency Band(900/1800/2100): Uplink: 890-915mhz, 1700-1779mhz, 1918-2000mhz. Downlink: 935-960mhz, 1796-1829mhz, 2096-2185mhz. BulletPoint3 : Gain: Uplink 35 ± 3dBb / Downlink 70 ± 3dB. Output Power: Uplink 17 ± 2dBbm / Downlink 20 ± 2dBm. BulletPoint4 : ALC Range: ≥15. IM3: ≤-36dBc. VSWR: 2:1. Delay: ≤0.5us. Impedance: 50Ω. Port: SMA,F. Supply: 12V/2A. Coverage: 0-2000 square meters. BulletPoint5 : Strong penetration, wide coverage, home signal instantly full grid. BulletPoint6 : High shielding, low radiation, can be used safely and securely. BulletPoint7 : Warm Tips: The indoor antenna should be installed at a height of more than two meters on the indoor wall or upside down on the ceiling, and the outdoor antenna must be higher than the indoor antenna. CompatibleDevices : Smartphone DataTransferRate : 1800 MHz ExternallyAssignedProductIdentifier : 8050003515850 FrequencyBandClass : dual_band IncludedComponents : Instruction manual IncludedComponents1 : Cable IncludedComponents2 : Antenna IncludedComponents3 : Instruction manual ItemName : JMT 4G Tri-Band Cellular Signal Booster 2G 3G 4G Repeater B1 B3 B5 Mobile Phone Amplifier 900 1800 2100mhz (Combo B) ItemPackageDimensions_Height : 5 centimeters ItemPackageDimensions_Length : 31 centimeters ItemPackageDimensions_Width : 22 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : cell-phone-antenna-boosters Manufacturer : JMT ModelName : Zerodiscua1x8is75-13 ModelNumber : Zerodiscua1x8is75-13 PartNumber : Signal Booster ProductDescription : JMT 4G Tri-Band Cellular Signal Booster 2G 3G 4G Repeater B1 B3 B5 Mobile Phone Amplifier 900 1800 2100mhz
Precautions 1, Outdoor antenna installation location must be able to make a clear call (generally 3-4 more than the best grid) 2.Outdoor antenna and the host should be straight line distance of 7 meters, so as to avoid self-excitation. 3. The indoor antenna should be installed at a height of more than two meters on the indoor wall or upside down on the ceiling, and the outdoor antenna must be higher than the indoor antenna. 4. All connectors must be tightened and wrapped with tape to avoid water oxidation, resulting in reduced indoor signal coverage.
Product Feature: It is mainly solved in urban villages, basements, elevators, garages, villas, offices, warehouses and some other blind areas where signals cannot reach. Strong penetration, wide coverage, home signal instantly full grid. High shielding, low radiation, can be used safely and securely. ProductSiteLaunchDate : 2023-08-15T07:13:53.615Z Range : 200 square_feet Size : Combo B