Cart 2 india

Specification
Brand : DYTDIEYINGTU
BulletPoint1 : Please note, customers: This cable only serves the shutter release function (focusing, taking photos, and recording videos) and does not support adjusting ISO/ shutter speed on the stabilizer Zoom function
BulletPoint2 : The mcc-p (2.5mm small round hole plug) is suitable for Panasonic cameras GH2,GH3,GH4,GH5,GH5S,GH6,GH7,S1,S1H,S1R,S5,S5II,s5m2xs,G9,G95，G90,G99,G85,GX7,GX8,GXL,DMC-FZ(20/20K/20S/30/30K
BulletPoint3 : This cable is for the camera shutter release function. Half-pressing the red button on the DJI S supports focusing. Press it to take a photo. When the camera is adjusted to the video recording mode, press it to control the video recording
BulletPoint4 : Supports the DJI Ronin-s stabilizer but not others. After plugging in the cable, no Settings are required and you can directly control the camera's photo shooting
BulletPoint5 : The shutter release port "remote" of Panasnic cameras - for most camera models, it is located above the SD card at the same position
CamcorderType : action_camera
Color : as described
ConnectivityTechnology : as described
ExternallyAssignedProductIdentifier : 7687021801798
IncludedComponents : MCC-P cable 1 pcs
ItemName : MCC-P The DJI Ronin-S stabilizer Connection Cable is Suitable for panasoni gh4/5/6/7/3 s5/s5II/S5M2XS G85/G90/G95/DMC-FZ2000/1000/20/50/100 Shutter Release Cable
ItemPackageDimensions_Height : 0.7 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 3.2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : camera-shutter-release-cords
Manufacturer : DYTDIEYINGTU
ModelName : MCC-P
ModelNumber : RASTKYnwad1f67bo
NumberOfItems : 1
PartNumber : MCC-P/2.5
ProductDescription :

• MCC-P DJI Ronin-S for Panasnic camera shutter release cable 
• Applicable stabilizer: DJI Ronin-S
  
• 1) Supported control functions: Half-press focus, press to take a photo, start/stop recording (the camera needs to be adjusted to the recording mode) 
• 2) Applicable camera models; GH2,GH3,GH4,GH5,GH5S,GH6,GH7,S1,S1H,S1R,S5,S5II,s5m2xs,G9,G95 G90,G99,G85,GX7,GX8,GXL,DMC-FZ(20/20K/20S/30/30K /30S/50/50K/50S/100/150/200/1000/2000),G1,G2,G3,G5 G6,G7,G10,GF1 
• 3) When adjusting the Panasonic camera to the video mode, hold down the DJI red button for 2 seconds to control the video 
• 4) This connection cable is a shutter release connection cable, and its function is the same as the shutter release button on the camera. 
• 5) for Panasnic camera shutter release port remote- for most camera models, it is located above the SD card at the same position.
• 6) If it cannot be operated, please rotate the camera's plug to check if it is not inserted into the bottom properly 
• 7) Usage of the red button on the DJI stabilizer: 
• 7-01- Half-press without releasing your hand to focus the camera. -
• 7-02-Press it down and hold for 2 seconds, then take a photo with the camera. 
• 7-03- Adjust the camera to the video mode, press it all the way down, and the recording will start. 
• 8) for Panasonic camera usage Settings Precautions 
•  8-1. Set the USB mode of the camera to PC (Tether) mode or select PC (Tether) mode in the pop-up page box of the camera when it starts up. 
• 8-2. Switch the focus mode switch on the camera body to the AFS/AFF/AFC position, and the camera's autofocus can be triggered through the camera control buttons on the gimbal.
  
• 9) Please note, customers: This cable only serves the shutter release function (focusing, taking photos, and recording videos) and does not support adjusting ISO/ shutter speed on the stabilizer Zoom function
  

ProductSiteLaunchDate : 2025-04-25T09:24:44.171Z
Size : 400mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 45121600
WarrantyDescription : Manufacturer warranty for 90 day