Wide range of applicable industries: Apply to mass production of small and micro e-commerce; Proofing production by shrink film label manufacturers and other related industries.
Easy to operate: simple operation instructions, it's very easy to operate anywhere.
Protection function: The heater has an anti-dry burning function, when the temperature rises to the protection temperature, the anti-dry burning component will be disconnected(which can be recovered later), please add water immediately to avoid machine damaged.
Equipment starts and stops control: Turning on the controller, the water inlet electromagnetic pump will start, and 100℃ steam will be ejected immediately after the steam generator inlet the water; When the water level is too low, the water will be not enough to enter the water pump, please add water in time to avoid damage to the machine due to dry burning.
Switch on or off: The controller can be turned on or off with the run/stop button on the controller's panel.
Automatic Grade: Semi-automatic
Driven Type: Electric
Voltage:220V/110V
Dimension(L*W*H): 480*400*320mm
Weight:19.5 KG
Water capacity: External pure water
Saturated steam temperature:102°C
Rated frequency:50Hz
Rated input power:2.5kW
Packing box size:510*510*360mm
Operation Steps:
1. Turn on the power switch; it takes 3-4 minutes for the cold machine to start, and the temperature in the box can reach 100°C.
2. Open the drawer (the drawer should be fully open to make the inner door closed, to prevent the steam from coming out of the machine). Be careful not to be scalded by the steam coming out of the drawer.
3. Put the lunch box with the protective film in the box, close the drawer for 2-3 seconds, open the drawer, then take out the packed lunch box.