Specification
Material: Urea-formaldehyde; Nylon Fibers
Style: Modern
Color: Black, Silver
Finish Type: Painted
Assembly Required: Yes
Load-bearing: 200kg/440 lbs
Net Weight: 2.42kg/5.33 lbs
Gross Weight: 3.1kg/6.83 lbs
Panel Size: 35*32.8cm/13.78*12.9in
Base Size: 21*12*4.95cm/8.3*4.72*1.95in
Application
The 440-pound load-bearing capacity of this folding shower seat is very important for the people with limited mobility. In addition to being used as a shower seat and footrest in the shower room, you can also rest in insufficient space such as corridors, dressing rooms, entrances and exits.
Package Included
1x Foldable Wall-mounted Seat
1x English Instruction
1x Mounting Hole Pitch Positioning Sticker
All Accessories for Assembly
Notes:
1.Lightweight concrete, solid bricks, and naturally dense stone are installable walls. Porous bricks, lime sand bricks, thin hollow walls, single board walls, and other medium to low load-bearing walls should be reinforced before installation.And the gypsum wall cannot be installed.
2.When drilling solid walls: If it is found that the wall material is loose and the bearing capacity is not strong, or if the screws are easily tightened during installation, please confirm the strength of the wall again. If there are any problems, please change the installation position or reinforce it. You can pour cement into the wall and wait for it to solidify before drilling for installation.
3.The installation height of products above the ground shall be based on the actual use of the user.
4.It is normal that the expansion screw will blow up after the force is applied.
5.Please read the English manual completely before installing. And pay particular attention to the safety instructions included.