Cart 2 india

Specification
Brand : Isolate It!
BulletPoint1 : High Performance Ultra-Soft Polyurethane
BulletPoint2 : Exception Acoustic Energy Insulation
BulletPoint3 : Ultra Thin Film Fits Many Different Applications
BulletPoint4 : 0.188" of Sorbothane Will Absorb up to 18.8 dB
BulletPoint5 : Thickness Tolerance: +/- 0.020" Durometer: 30 Shore OO
Color : Black
Coverage : acoustic and vibration damping
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 817532014272
ExternallyAssignedProductIdentifier2 : 0817532014272
ItemName : Isolate It!: Sorbothane Acoustic & Vibration Damping Film 30 Duro (0.188 x 6 x 12in) - 1 Sheet
ItemPackageDimensions_Height : 34.29 centimeters
ItemPackageDimensions_Length : 1.27 centimeters
ItemPackageDimensions_Width : 27.94 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardware-shoulder-washers
Manufacturer : Sorbothane
Material1 : Rubber
Material2 : Polyurethane rubber
ModelName : Sorbothane Film
ModelNumber : 0206118-30
PartNumber : 0206118-30-10
ProductDescription : Isolate It! Sorbothane acoustic and vibration isolation thin films are versatile anti-vibration pads that can be used on many different applications. The unique Sorbothane ultra-soft urethane is a durable, resilient, polymer that provides outstanding vibration isolation and non-skid properties. Sorbothane isolators help absorb impact and noise and have excellent resistance to aging; they will not harden or crack over time. They feature a smooth, clean, black urethane surface. Use them on any audio and electronic equipment to prevent skipping and interference.

More is not better. A large lightly loaded sheet will have a high spring rate and will not deflect enough to provide good isolation. Over compression will lead to short service life. The proper compression range is 3 to 20 per cent depending on the "Shape Factor." Shape factor is the ratio of contact surface (one side) divided by perimeter area. Geometry matters. Small circular pieces and rings "bulge" better than squares and rectangles. "Bulgeability" makes for better isolation. Use many small discs rather than a few large rectangles for best vibration isolation performance. Thickness matters. The thicker the sheet the lower the natural frequency. You need a sheet at least one-inch thick to get your natural frequency down to 10 Hertz. (10 Hertz is your target natural frequency for a 900 RPM motor.) Use the natural tackiness of Sorbothane or apply 3M #80 Spray adhesives to glue the Sorbothane to metal, plastic and other surfaces. This sheet is perfect for cutting to meet the needs of special applications or can be used whole. Can be but using a sharp utility knife or scissor. Apply sheet as a whole or use to coat the inside of speakers or equipment housings to provide sound insulation. 1 cm of Sorbothane can isolate up to 40 dB of sound

Caution: This product contains plasticizer which may cause minor discoloration to wood, plastic, composite and other materials following prolonged contact.
ProductSiteLaunchDate : 2010-12-31T08:00:00.000Z
RecommendedUsesForProduct : Preventing skipping and interference in audio and electronic equipment, providing sound insulation, used as feet, stops, spacers and protectors in various applications
UnitCount : 1
UnspscCode : 30000000