Cart 2 india

Specification
Brand : YIYIBYUS
BulletPoint1 : Easy to Carry: The plaster cutter comes with a case for storing various accessories so you can easily carry them anywhere. The case is also protected from damage by its protective packaging.
BulletPoint2 : Skin Protection: The plaster cutter has a skin protection feature that prevents injury even when the blade lightly touches the skin.
BulletPoint3 : Easy to Operate: The plaster cutter uses a special micro-motor to limit the size of the product. The right size and light weight make it easy to handle.
BulletPoint4 : Adjustable Speed: Thel plaster cutter has 6 stages of gearing. You can adjust the cutting speed precisely by touching the adjustment buttons, which is very convenient.
BulletPoint5 : One-touch Switch: The plaster cutter has a power switch. It is very convenient and quick to control the power on/off at the touch of a button.
ExternallyAssignedProductIdentifier1 : 0715092575823
ExternallyAssignedProductIdentifier2 : 715092575823
IncludedComponents : Package Included 1*Plaster Cutter 1*Allen Key 1*Fan-shaped Saw Blade 1*Small Circular Saw Blade 1*Big Circular Saw Blade 1*Aluminum Alloy Case 1*English Manual
ItemDisplayWeight : 592 pounds
ItemName : YIYIBYUS Med-ical Electric Plaster Saw Cast Cutter Orthopedic Sports M-ed-icine
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : power-shears
Manufacturer : WANGYANG shop
Material : Leather
Material1 : Metal
Material2 : Rubber
Material3 : Aluminum
MaximumCurrent : 14 amps
MaximumRotationalSpeed : 10000 rpm
ModelName : Plaster Saw Cast Cutter
ModelNumber : QAZ-99
NumberOfItems : 1
PartNumber : Canglan Technology
PowerSourceType : NO
ProductDescription : Specification

Material: Alloy, Rubber, Aluminum Alloy
Color: Green
Case Color: Blue
Power Supply: Corded Electric
Input Power: 110V 50Hz
Rated Input Power: 125W
Oscillation Frequency: ≧12500 times/min
Oscillation Amplitude: 5 degrees
Noise: ≤84dB
Motor Winding Insulation Grade: E Grade
Number of Gears: 6
Gross Weight: 3.5kg/7.71lbs
Net Weight: 2.8kg/6.17lbs
Package Size: 39*24*13cm/15.35*9.44*5.11in
Case Size: 37*11*22cm/14.57*4.33*8.66in

Package Included

1*El-e-ct-ric M-e-di-cal Plaster Cutter
1*Allen Key
1*Fan-shaped Saw Blade
1*Small Circular Saw Blade
1*Big Circular Saw Blade
1*Aluminum Alloy Case
1*English Manual

Notes

1. Before use, check whether the saw blade is flat, missing teeth,
and properly installed. When installing the saw blade, fix the saw
blade shaft, embed the flat square status on the shaft with a
wrench, remove the nut in front of the saw blade with another
wrench, exit the concave sleeve and the saw blade, and replace it
with another saw blade and then screw it tightly. Check the
ventilation channel of the motor, should be kept clear to prevent
foreign objects from blockage, resulting in poor ventilation,
resulting in high-temperature rise when the motor is working, and
even burning the motor.
2. When using, do not use too much pressure, and should be
pressurized when the saw blade produces a swing. Saw blade in
the plaster bandage suddenly stuck, should cut off the power
slowly out, rather than the power switch on and off, easy to make
the motor damage.
3, The use of the motor shell temperature increases with time,
such as if the shell temperature is found to be too hot should be
suspended, and wait a while to cool down before use, otherwise,
it is easy to cause the motor overheating and burning.
4. When there is an abnormal sound, excessive vibration, and
other conditions in use, should be promptly overhauled.
5. After the operation should be wiped clean the plaster saw,
usually the plaster saw should be placed in a dry place (relative ro-nm-ent) to prevent damage and water in the fall.
6. Please allow the slight color difference caused by the shooting
light and 1-3cm error due to manual measurement. Please make
sure you do not mind before you order.
ProductSiteLaunchDate : 2022-09-20T06:30:43.675Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Aluminum
UnitCount : 1
Voltage : 220 volts