Cart 2 india

Specification
Brand : yaogohua
BulletPoint1 : 【PEMIUM QUALITY】 Suitable for degreasing of engine cylinders with diameters of 3/4 in to 2‑1/2 in and 1‑1/4 in to 3‑1/2 in.
BulletPoint2 : 【HIGH PERFORMANCE】 Flexible shaft, easy to use and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole.
BulletPoint3 : 【PRACTICAL &USEFUL】The surface is alloy plating, not easy to rust, wearale and useful for long time use. Remove carbon deposits and hot glazes from cylinder holes. Ideal for removing rust deposits from older re‑ builds.
BulletPoint4 : 【PROFESSIONAL DESIGN】Exquisite design, exquisite workmanship, first-class quality, reflected in every detail. Adopt premium iron material, antirust, anti‑corrosion and , ensures long lifespan.
BulletPoint5 : 【SERVICE GUARANTEE】We provide 7/24 fast after-sales services. 1 year warranty and professional technical support team, please use it with confidence. Ergonomic design, easy to operate, labor-saving, high work efficiency, bring much convenience for you.
CareInstructions : Hand Wash
Color : #211
ExternallyAssignedProductIdentifier : 4680198727048
IncludedComponents : sandpaper
ItemName : YAOGOHUA 3 Jaws Cylinder Honing Tool Flexible Shaft Engine Hone Carbon Removing for Car 2‑6.7in Range
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 43 centimeters
ItemPackageDimensions_Width : 13 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sharpening-stones
ItemTypeName : Sharpening Stones
Manufacturer : yaogohua
Material : Aluminum
Material1 : Polyurethane (PU)
Material2 : Foam
ModelName : yaogohuaok1tw9cp5i
ModelNumber : yaogohuaok1tw9cp5i
NumberOfItems : 1
PartNumber : yaogohuaok1tw9cp5i
ProductDescription : What You Will Get - We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply

Condition: Brand New
Item Type: Cylinder Honing Tool
Material: Iron
Manufacturer Part Number: 88233
Range: Approx. 51-165mm/2-6.5in
Usage:
Step 1.
Spray lubricant on the stones or the cylinder bores. Get the hone set up on the drill.
Step 2.
Insert the engine hone into the cylinder and run the drill at low speed between 300-700 RPM. Move the hone up and down around once a second.
Don't push or pull the stones more than 3/4 inches out of the cylinder. Don't run the engine hone for more than 3 mins.
Step 3.
After honing, use a paper towel to wipe out the inside of cylinder.

Package List：
1 x Cylinder Honing Tool Service Guarantee - If you have any question or any unsatisfactory about the product, you can contact our customer service at any time, our team will response you in 24 hours.

ProductSiteLaunchDate : 2024-06-08T17:48:01.220Z
Size : Length 4 in, Width 7/8 in, Height
Style : W0.5/10000th
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Wood
UnitCount : 1