Cart 2 india

Specification
Brand : Taytools
BulletPoint1 : This is a piece of 5/16 inch thick x 3-1/4 inch x 8-1/4 inch float glass for use as a flat, hard surface in a the Scary Sharpening System
BulletPoint2 : Float glass is dead flat and the perfect substrate to attach abrasive sheets
BulletPoint3 : Pressure Sensitive Adhesive (PSA) lappping film sheets are recommended as all that is required is to peel off the backing and stick to glass.
BulletPoint4 : Microfinishing/lapping film will need to be cut to size to fit glass plate
BulletPoint5 : The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective.
BulletPoint6 : Water-cooled stone grinding wheel prevents tools from overheating
BulletPoint7 : Ideal for wood turning chisels, knives, and hand carving tools
CareInstructions : Hand Wash
Color : Clear
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 796029773420
ExternallyAssignedProductIdentifier2 : 0796029773420
ExternallyAssignedProductIdentifier3 : 00036577003113
GpsrSafetyAttestation : 1
IncludedComponents : three 5/32" (4 mm) replacement sharpening stones
ItemDisplayWeight : 1 pounds
ItemName : Taytools 773420 One Piece 5/16 x 3-1/4 x 8-1/4 Dead Flat Float Glass for Scary Sharp Sharpening System
ItemPackageDimensions_Height : 27 centimeters
ItemPackageDimensions_Length : 5.7 centimeters
ItemPackageDimensions_Width : 11.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sharpening-stones
Manufacturer : Taylor Toolworks
Material : Glass
ModelName : WSSA0005297-ATL
ModelNumber : 773420
NumberOfItems : 1
PackageLevel : unit
PartNumber : 773420
ProductDescription : The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective. Instead of using conventional, more expensive and messy oil, water or diamond stones, the Scary Sharp Method uses specialized microfinishing or lapping film that is adhered to a hard, flat substrate. High quality Aluminum Oxide, Silicon Carbide or Diamond films can be procured for a reasonable cost per sheet. These films can then be affixed to float glass or granite plates. Float glass is considered the preferred substrate to attach abrasive sheets to as it is “dead flat”. Pressure Sensitive Adhesive (PSA) sheets are recommended as all that is required is to peel off the backing and stick to glass or granite. Fresh lapping film will cut faster than most sharpening stones and can be easily and quickly replaced when dull. Unlike traditional water or oil stones no maintenance is required since the glass or granite surface will never hollow from prolonged or uneven use. The Scary Sharp Method will quickly sharpen any knife or cutting tool with excellent and consistent results.
ProductSiteLaunchDate : 2019-06-03T07:00:00.000Z
Size : 32 Inch
Style : Sharpening system
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 52151600
Voltage : 120 volts