Cart 2 india

Specification
Brand : Baitaihem
BulletPoint1 : Brass and stainless steel roller design, give you more choice, and make move back and forth without restriction during sharpening.
BulletPoint2 : Keep the same direction, anti-slip, smooth and safe.
BulletPoint3 : Two sections to use, fits chisels width 0.15 inch- 2.1 inch, planer width 1.4 inch - 3.1 inch.
BulletPoint4 : Suitable wood chisel, planer, blade, graver, carving knife, plane iron, flat chisel edge sharpening.
BulletPoint5 : Standard size ver. of coarse grit #320
CareInstructions : Hand Wash
Color : Silver
Color1 : Silver
Color2 : Yellow
Color3 : Black
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 4966684080034
ExternallyAssignedProductIdentifier1 : 615068523998
ExternallyAssignedProductIdentifier2 : 0615068523998
ExternallyAssignedProductIdentifier3 : 5055732662168
ExternallyAssignedProductIdentifier4 : 00080999090008
GpsrSafetyAttestation : 1
IncludedComponents : Standard Diamond System
ItemDisplayDimensions_Height : 2 inches
ItemDisplayDimensions_Length : 1 inches
ItemDisplayDimensions_Width : 2 inches
ItemDisplayWeight : 1150 grams
ItemName : Baitaihem Stainless Steel Honing Guide, Fits Planer Width 1.4" To 3.1", Chisel Blades Width 0.35" To 2.1"
ItemPackageDimensions_Height : 11.176 centimeters
ItemPackageDimensions_Length : 3.302 centimeters
ItemPackageDimensions_Width : 4.318 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sharpening-stones
Manufacturer : Baitaihem
Material : Stainless Steel
ModelName : LK3DM
ModelNumber : MT0079
NumberOfItems : 1
PackageLevel : unit
PartNumber : MT0079
Pattern : Solid
ProductDescription : How To Use?
Turn the screw cap counterclockwise, clamp your chisel or other knife tools, move up and down to adjust freely blade angle.
Then tighten the screw cap clockwise, the blade edge is smoothly fitted to the whetstone or sharpening stones, slide the knife back and forth until your tools become sharper and more precise!

WHAT CHISEL AND PLANE SIZES WILL THIS TOOL SUPPORT?
Our Honing Jig has 2 sections for clamping your tools which are all fully adjustable:
* The upper jaws clamp plane irons and adjust from 1.4” to 3.1” in width
* The lower jaws clamp paring and low-angle chisels and adjust from 0.35” to 2.1” in width

CAN I ADJUST THE SHARPENING ANGLE?
Yes! This tool allows you to sharpen at nearly any angle you please by adjusting tool projection.
Projection measurements for 25° and 30° angles can be conveniently located on the packaging and on the cast aluminum body of the tool for your convenience and ease of use.

Specifications:
Material: Stainless Steel
Weight: 275 g / 9.7 oz
Clamping Width Range: 9 mm - 78 mm / 0.31 inch - 3.1 inch
Support Chisel Max Clamping Width to 55mm (2.17")
Size: 3.8 x 1.57 x 1.2 inch(L*W*H)

Package Included:
1 x Stainless Steel Honing Guide

ProductSiteLaunchDate : 2019-03-05T08:00:00.000Z
Size : One Size
StreetDate : 2008-10-01T00:00:01Z
Style : Stainless Steel
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 16
UnspscCode : 52151600