Specification Brand : Taytools BulletPoint : filament-3d-printing-materials BulletPoint1 : Three sheets 3 micron (8.000 grit) lapping film 8.5" x 11" BulletPoint2 : PSA (pressure sensitive adhesive) backing BulletPoint3 : 3 mil high-strength polyester film backing BulletPoint4 : Aluminum Oxide (AO) abrasive material BulletPoint5 : Pinkcolor CareInstructions : Hand Wash Color : Pink CompatibleMaterial1 : Glass CompatibleMaterial2 : Aluminum CompatibleMaterial3 : Wood ExternallyAssignedProductIdentifier1 : 0700667463360 ExternallyAssignedProductIdentifier2 : 700667463360 ExternallyAssignedProductIdentifier3 : 00080999094907 IncludedComponents : Diamond Bench Stone ItemDisplayDimensions_Height : 1.5 inches ItemDisplayDimensions_Length : 11.63 inches ItemDisplayDimensions_Width : 5.38 inches ItemName : 3 Sheet Bundle 3 Micron (8,000 Grit) PSA Lapping Microfinishing Film Aluminum Oxide (AO) 8 1/2” x 11” 266Xx3 ItemPackageDimensions_Height : 27.3 centimeters ItemPackageDimensions_Length : 4.2 centimeters ItemPackageDimensions_Width : 13.7 centimeters ItemPackageQuantity : 2 ItemTypeKeyword : sharpening-stones ItemTypeName : Diamond Bench Stone - (Extra Fine, 6in x 2in) Manufacturer : Taytools Material : Aluminum Oxide ModelName : Diamond Bench Stone - (Extra Fine, 6in x 2in) ModelNumber : LDB6E NumberOfItems : 1 PackageLevel : unit PartNumber : 266Xx3 ProductDescription : This lapping film is 100% made in the USA. These microfinishing lapping sheets were developed for industry applications and can be used to flat lap or polish just about anything. This lapping film contains carefully graded aluminum oxide particles that are electrostatically coated onto a high strength polyester film backing. This fast cutting, water resistant abrasive provides precise, consistent, close tolerance finishes, and are available in a wide range of precise micron grades to meet any sharpening or polishing need. They can be affixed to a hard flat surface (usually 1/4 inch glass) and used to get a scary sharp edge on wood chisels or plane irons. They can be wrapped around contoured sticks and used to sharpen carving tools. They can put a wicked sharp edge on all kinds of knives. They can also be used to put a fine polish on jewelry or gem stones. These are PSA (Pressure Sensitive Adhesive) backed. They have a 3 mil high-strength polyester film backing which is less likely to tear than traditional wet or dry sandpaper. The sheets are not marked so using their color is the only accurate way to identify them. ProductSiteLaunchDate : 2017-04-19T07:00:00.000Z Size : 8.5" x 11" StreetDate : 2009-12-21T00:00:01Z SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1