Cart 2 india

Specification
Brand : Taytools
BulletPoint : ANYCUBIC Hotbed for Kobra Plus 3D Printers, Accessories for Kobra Plus 3D Printers
BulletPoint1 : Two sheets 3 micron (8.000 grit) lapping film 8.5" x 11"
BulletPoint2 : PSA (pressure sensitive adhesive) backing
BulletPoint3 : 3 mil high-strength polyester film backing
BulletPoint4 : Aluminum Oxide (AO) abrasive material
BulletPoint5 : Pinkcolor
Color : Pink
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
CompatibleMaterial : Alloy Steel
CompatibleMaterial1 : Glass
CompatibleMaterial2 : Aluminum
CompatibleMaterial3 : Wood
CompatibleMaterial4 : Polylactic Acid
ExternallyAssignedProductIdentifier1 : 0700667463353
ExternallyAssignedProductIdentifier2 : 700667463353
FinishType : Chrome
IncludedComponents : Buckle
ItemName : 2 Sheet Bundle 3 Micron (8,000 Grit) PSA Lapping Microfinishing Film Aluminum Oxide (AO) 8 1/2” x 11” 266Xx2
ItemPackageDimensions_Height : 28.4988 centimeters
ItemPackageDimensions_Length : 4.3942 centimeters
ItemPackageDimensions_Width : 27.7114 centimeters
ItemPackageQuantity : 2
ItemTypeKeyword : sharpening-stones
Manufacturer : Taytools
Material : Aluminum Oxide
ModelNumber : MK52 24V
NumberOfBoxes : 1
NumberOfItems : 1
OperatingSystem : Linux
PartNumber : 266Xx2
ProductDescription : This lapping film is 100% made in the USA. These microfinishing lapping sheets were developed for industry applications and can be used to flat lap or polish just about anything. This lapping film contains carefully graded aluminum oxide particles that are electrostatically coated onto a high strength polyester film backing. This fast cutting, water resistant abrasive provides precise, consistent, close tolerance finishes, and are available in a wide range of precise micron grades to meet any sharpening or polishing need. They can be affixed to a hard flat surface (usually 1/4 inch glass) and used to get a scary sharp edge on wood chisels or plane irons. They can be wrapped around contoured sticks and used to sharpen carving tools. They can put a wicked sharp edge on all kinds of knives. They can also be used to put a fine polish on jewelry or gem stones. These are PSA (Pressure Sensitive Adhesive) backed. They have a 3 mil high-strength polyester film backing which is less likely to tear than traditional wet or dry sandpaper. The sheets are not marked so using their color is the only accurate way to identify them.
ProductSiteLaunchDate : 2017-04-19T07:00:00.000Z
Size : 8.5" x 11"
Style : fashion
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 621 volts