Cart 2 india

Specification
Brand : DINGSEN
BulletPoint : Old Town Golf Fujikura Pro 2.0 Driver Golf Shafts 6 - R2 Senior Flex Assembled Select Adapter / Taylormade - 6 - R2
BulletPoint1 : FULL SET WORK LIFE: Ideal for constructing a full set, Long Cure Golf Epoxy has a 30-minute work life, with an initial cure in 30 minutes and a full cure in 24 hours.
BulletPoint2 : WATERPROOF: The golf club epoxy glue cures to a clear finish, concealing repairs and offering 100% waterproof protection for use in any outdoor conditions.
BulletPoint3 : EXTRA DURABILITY: The Long Cure Golf Epoxy is specifically designed to handle the intense impact of golf shafts and clubheads, as well as swing speeds exceeding 130 mph.
BulletPoint4 : UNPARALLELED STRENGTH: The Long Cure golf epoxy is the ideal choice of glue for competitive long driving, thanks to its unparalleled bond strength.
BulletPoint5 : EASY TO USE: Sand the golf club head with a sanding belt, squeeze out the A and B epoxy in a 1:1 ratio, mix thoroughly (20-30 seconds) and apply to the wear areas of the golf club. Then screw the shaft into the sheath of the club head to coat all surfaces. Eventually wipe the excess epoxy off the club with alcohol and leave the club upright for at least 24 hours for it to fully solidify.
Color : 2.1oz
CompatibleMaterial : Metal, Wood, Plastic, Graphite
Department : unisex
ExternallyAssignedProductIdentifier1 : 027685044143
ExternallyAssignedProductIdentifier2 : 0027685044143
GpsrSafetyAttestation : 1
ImportDesignation : Imported
IncludedComponents : Golf Shaft
ItemForm : Liquid
ItemName : DINGSEN Golf Club Epoxy - 2.1oz Long Cure Golf Shaft Repair - Waterproof & Extra Strength - Golf Epoxy Glue for All Golf Shafts, Golf Heads, Drivers, Putters, and Irons，Tailored for The Golf Industry
ItemPackageDimensions_Height : 12.2936 centimeters
ItemPackageDimensions_Length : 2.794 centimeters
ItemPackageDimensions_Width : 7.6962 centimeters
ItemTypeKeyword : golf-club-shafts
ItemVolume : 55 milliliters
Manufacturer : DINGSEN
Material : Epoxy Resin
ModelName : TA-580
ModelNumber : YM-USGK-1143
NumberOfBoxes : 1
NumberOfItems : 3
NumberOfPieces : 2
PartNumber : NERT-ARFT-ZED1
Pattern : Solid
ProductDescription : Designed for golfers who demand perfection from their equipment, this epoxy offers a strong, durable bond that ensures your club heads are securely attached and ready for the green.

Usage Instructions:
1. Preparation:Begin by sanding the golf club head to ensure a perfect bond.
2. Mixing: Dispense equal parts of the A and B epoxy components and mix thoroughly for 20-30 seconds until uniform.
3. Application:Apply the mixed epoxy resin to the worn area of the golf club.
4. Assembly:After applying the epoxy, screw the club shaft into the club head ferrule, ensuring all surfaces are coated.
5. Cleanup: Wipe off any excess epoxy from the club with alcohol.
6. Curing: Stand the club upright and let it cure for at least 24 hours to ensure a strong, long-lasting bond.
Please note: Put the inner stopper back into the bottle after use, 55g syringe packs require the cap to be wiped clean and sealed.

Storage: Sealed
Occasions: Home/Golf Club

ProductSiteLaunchDate : 2024-10-19T08:35:32.514Z
Size : 2.1oz
SpecificUsesForProduct : Repair, Golf
Style : Taylormade
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31201600
Viscosity : Moderate
WarrantyDescription : NO
WaterResistanceLevel : waterproof