Cart 2 india

Specification
Brand : SKF
BulletPoint1 : The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
BulletPoint2 : The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
BulletPoint3 : "SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface. "
BulletPoint4 : "Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool. "
BulletPoint5 : While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
CompatibleWithVehicleType : Motorcycle
CoreMaterial : Stainless Steel
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 085311042451
ExternallyAssignedProductIdentifier2 : 0085311042451
ExternallyAssignedProductIdentifier3 : 00085311042451
ExternallyAssignedProductIdentifier4 : 00085311041034
FitType : Vehicle Specific
IncludedComponents : Speedi Sleeve
ItemName : SKF 99339 Speedi Sleeve, Inch, 3.438in Shaft Diameter, 0.781in Width
ItemPackageDimensions_Height : 6.604 centimeters
ItemPackageDimensions_Length : 15.748 centimeters
ItemPackageDimensions_Width : 15.494 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : shaft-hub-locking-devices
Manufacturer : SKF
Material : Stainless Steel
MetalType : Stainless Steel
ModelName : Speedi Sleeve
ModelNumber : 99339
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 99339
Pattern : Solid
ProductDescription : The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed. The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes. While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve.
ProductExpirationType : Does Not Expire
ProductSiteLaunchDate : 2010-10-05T17:43:22.796Z
ShellType : Soft
Size : One Size
Style : SSLEEVE
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1