Specification Brand : SKF BulletPoint1 : The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed BulletPoint2 : The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes BulletPoint3 : "SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface. " BulletPoint4 : "Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool. " BulletPoint5 : While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve ExteriorFinish : Machined ExternallyAssignedProductIdentifier1 : 085311089753 ExternallyAssignedProductIdentifier2 : 0085311089753 ExternallyAssignedProductIdentifier3 : 00085311089753 FitType : Vehicle Specific IncludedComponents : Keyless Bushing ItemName : SKF 99292 Speedi Sleeve, Inch, 2.974in Shaft Diameter, 0.813in Width ItemPackageDimensions_Height : 4.064 centimeters ItemPackageDimensions_Length : 10.922 centimeters ItemPackageDimensions_Width : 11.176 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : shaft-hub-locking-devices Manufacturer : SKF USA Material : Metal ModelName : Hub Unit ModelNumber : 99292 NumberOfBoxes : 1 NumberOfItems : 1 PackageLevel : unit PartNumber : 99292 ProductDescription : The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed. The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes. While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve. ProductExpirationType : Does Not Expire ProductSiteLaunchDate : 2012-07-15T08:00:01.000Z Style : SSLEEVE SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1