Cart 2 india

Specification
Brand : PATIKIL
BulletPoint1 : The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
BulletPoint2 : The rigid Coupling, we provide here, are in the size of: Material: Brass; Color: Gold; Screws Size: M4*0.7; Bore size: 8mm to 8mm/0.31inch to 0.31inch; Total Size: 22mm x 14mm/0.87inch x 0.55inch(L*D)
BulletPoint3 : Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
BulletPoint4 : Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
BulletPoint5 : Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
Color : Gold
ExteriorFinish : Brass
FinishType : Brass,Gold
ItemName : PATIKIL Shaft Coupler Connector L22 x D14 8mm to 8mm Bore Rigid Coupling Brass Shaft Joint w Screw,Wrench for 3D Printers Gold 2Pack
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 1.9 centimeters
ItemPackageDimensions_Width : 5.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : set-screw-couplings
Manufacturer : PATIKIL
Material : Brass
MaximumRotationalSpeed : 19000 rpm
MetalType : Brass
NumberOfItems : 4
PartNumber : pta221024tt0229
ProductDescription : What is this?
Shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane

What will I get?
Rigid Coupling, we provide here, are in the size of:
Material: Brass
Color: Gold
Screws Size: M4*0.7
Bore size: 8mm to 8mm/0.31inch to 0.31inch
Total Size: 22mm x 14mm/0.87inch x 0.55inch(L*D)
Package Content: 2Pack x shaft coupler

Is there any advantages of the product?
1. Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
2. Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.
3.No rotation gap and elastic action can make up for symmetrical angular misalignment.

How to use it?
Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.

What should I notice?
All size above is measured by manual, please allow +/-0.1 inch error.
ProductSiteLaunchDate : 2022-12-25T07:05:39.417Z
Size : 8mm to 8mm
Style : D32 L45
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31161700