Cart 2 india

Specification
Brand : KUIQEO
BulletPoint1 : IO/PT/RON Telescope Cable F/;TD/;1 USB RS232 to 4P4C RJ9 Adapter Serial Converter Adapter Cable Telescope PC Cable
BulletPoint2 : DIY IO/PT/RON Ieq30pro Telescope to PC Cable
BulletPoint3 : USB RS232 to 4P4C RJ10
BulletPoint4 : Compatible Compatible IO/PT/RON Telescope IEQ30pro ZEQ25 CEM60 Smarteq Pro
BulletPoint5 : Cable length:1.8mtr, 5mtr in length optional
Color : Black
ConnectorType : HDMI
ExternallyAssignedProductIdentifier : 7619361549979
ItemName : KUIQEO FENG GUO F/;TD/;1 USB RS232 4P4C RJ9 Adapter Serial Converter 6FT 16.4FT IO/PT/Ron Telescope Cable Compatible IEQ30pro ZEQ25 CEM60 Smarteq Pro(1.8m,Black)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : computer-serial-cables
Manufacturer : KUIQEO
ModelName : guo feng
ModelNumber : guo feng
NumberOfItems : 1
PartNumber : guo feng
ProductDescription : IO/PT/RON Telescope Cable F/;TD/;1 USB RS232 to 4P4C RJ9 Adapter Serial Converter Adapter Cable Telescope PC Cable
DIY IO/PT/RON Ieq30pro Telescope to PC Cable
USB RS232 to 4P4C RJ10
Compatible Compatible IO/PT/RON Telescope IEQ30pro ZEQ25 CEM60 Smarteq Pro
Cable length:1.8mtr, 5mtr in length optional
Building the cable is quite simple and only requires soldering 3 joints and placing 3 wires into a RJ9 pl;/ug and crimping the punch downs to secure the cable
Replaced the old version USB to DB9 and DB9 to RJ9 Cable (snowy cable)
Most of our readers here will be surprised to learn that I am an amateur astronomer. I spend every chance I get under the stars taking in the amazing views that can be seen from my 10" Meade LXD-55 Schmidt Newtonian. With my background in photography, it should come as no surprise that I have shifted more into astrophotography than visual observing. My imaging sessions are usually conducted with two of my best friends at a private observatory owned by o/n;e of them . The observatory is nice but it is located about 35-40 minutes from me and thus I do not get out there as much as I would like to. So over the last couple of months I have been gearing up my scope Compatible imaging. o/n;e of the first task I had to tackle was building a cable that would allow me to control my telescope from my PC, and that is what today's tutorial is all about.
There are several reasons o/n;e would want to control their telescope with a PC:
It is faster than using the hand controller.
It gives you a visual aid when searching Compatible something hard to find.
If you find something unknown, the planetarium software will be able to identify it.
It is a necessity if you plan on imaging anything Compatible longer than a single quick exposure.
It's wicked cool!
Building the cable is quite simple and only requires soldering 3 joints and placing 3 wires into a RJ10 pl;/ug and crimping the punch downs to
ProductSiteLaunchDate : 2025-04-10T08:56:11.483Z
Size : 1.8m
UnitCount : 1
UnspscCode : 43202222