Specification Brand : MITSUBISHI ELECTRIC BulletPoint1 : USB TO TTL, support 5V/3.3V/2.5V/1.8V four level switching, adapting to different voltage system, using a dip switch to select the voltage, without power failure operation. BulletPoint2 : USB port with electrostatic protection and current protection. Signal interface RX, TX, CTS, RTS port with current protection and ESD protection. BulletPoint3 : Baud rate support range: CH340: 50bps ~ 2M bps ; FT232: 300bps ~ 3Mbps ; CP2102: 300bps ~ 1M bps BulletPoint4 : Pin out CTS, RTS signal pins, FT232, CP2102 version additional pin out DTR, DSR, DCT pins, can be convenient for hardware flow control. BulletPoint5 : Adopt chip conversion program, non-transistor program, the low level is 0V (transistor program due to the conduction voltage drop, the low level can not reach 0V) Color : Type-C CompatibleDevices : Personal Computer, Laptop, Tablet, Smartphone ConnectorType : DIN ConnectorType1 : Lightning ConnectorType2 : Component ConnectorType3 : RJ45 CurrentRating : 15 milliamps CustomerPackageType : Standard Packaging ExternallyAssignedProductIdentifier1 : 799418887203 ExternallyAssignedProductIdentifier2 : 0799418887203 FinishType : Matte HardwareInterface : usb InputVoltage : 5 volts ItemName : MITSUBISHI FX-USB-AW COVNERSION Interface Unit to Connect USB/RS422 Module, for FX PLCS, Interface Converter, MELSEC-F Series, PRORGRAMMABLE Controller, USB to Serial Program Cable ItemPackageDimensions_Height : 31 millimeters ItemPackageDimensions_Length : 71 millimeters ItemPackageDimensions_Width : 41 millimeters ItemPackageQuantity : 1 ItemTypeKeyword : computer-cable-serial-adapters Manufacturer : MITSUBISHI ELECTRIC Material : copper ModelNumber : A1UTMLTC3A NumberOfItems : 1 NumberOfPorts : 1 OperatingSystem : Windows, Linux PartNumber : FX-USB-AW PowerPlugType : type_i_3pin_au ProductDescription : [Current consumption] [Rating]CE (EMC) [Applicable PLCs] FX1S/FX3U/FX3UC/FX3G/FX3GE/FX3S [Applications] USB to RS-422 converter [Dimensions (W x H x D)mm] 14 x 20 x 63 15mA/5V DC(5V DC power is supplied from the internal power supply of PLC) 30mA/5V DC(5V DC power is supplied from the USB connector of personal computer) [Level Conversion]Bidirectional between RS-422 and USB(Between signals are isolated by photocoupler.) [Baud Rate]115200 bps, maximum (The baud rate is different in PLC.) [Transmission standard]USB2.0 (For full speed) [Signal name (Port)] To PLC:RS-422 (Mini-DIN 8Pin male) To a cable:USB (Mini-B plug female)