Cart 2 india

Specification
Brand : LoveRPi
BulletPoint1 : DEBUG SERIAL UART CABLE FOR RASPBERRY PI AND OTHER 3.3V SYSTEMS: Instead of guessing problems through a black screen, find out exactly what is going on with your board. Issue commands, grab logs, and debug problems quickly with his convenient USB cable.
BulletPoint2 : PLUG AND PLAY WITH WINDOWS MAC LINUX: Fire up putty for Windows, Minicom or Screen or Mac and Linux to get direct access when you don't have video or network.
BulletPoint3 : RASPBERRY PI 3/4 GUIDE: You must open /boot/config.txt or edit config.txt on your MicroSD card and add "enable_uart=1" without quotes in order for this to work for Raspberry Pi 3/4 Model B and Model B+. Otherwise UART is not enabled and will not display anything.
BulletPoint4 : CONNECTING TO 40 PIN HEADER: Three pins need to be connected for UART to work, the black ground (GND) wire, the white RX wire, and the green TX wire. Black should be connected to pin 6, white should be connected to pin 8, and green should be connected to pin 10.
BulletPoint5 : CONFIGURE BAUD RATE, FLOW CONTROL, PARITY FOR YOUR BOARD: The default baud rate for Raspberry Pi is 115200. Flow control is not supported by the Raspberry Pi 3 so it should be disabled. 8N1 mode must be selected so that there are 8 data bits, no parity, and 1 stop bit.
Color : Green,White
CompatibleDevices : PC
ConnectorGender : Male-to-Female
ConnectorType : Usb
ConnectorType1 : Auxiliary
ConnectorType2 : DB9 9 Pin
CurrentRating : 1 amps
CustomerPackageType : loose
DataTransferRate : 2 megabits_per_second
ExternallyAssignedProductIdentifier1 : 647923367546
ExternallyAssignedProductIdentifier2 : 0647923367546
FinishType : Abs
HardwareInterface : usb_c
IncludedComponents : DB-9 RS-232 Converter Cable
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : LoveRPi USB UART Serial Debug Cable for Raspberry Pi and 3.3V Systems
ItemPackageDimensions_Height : 11.938 centimeters
ItemPackageDimensions_Length : 0.508 centimeters
ItemPackageDimensions_Width : 8.89 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : computer-cable-serial-adapters
LowerTemperatureRating : -20 degrees_celsius
Manufacturer : LoveRPi
Material : Copper
MaximumVoltage : 5 volts
ModelName : XBL-AV-10037
ModelNumber : 647923367546
MountingType1 : Panel Mount
MountingType2 : DIN Rail Mount
NumberOfContacts : 9
NumberOfItems : 1
NumberOfPins : 40
NumberOfPoles : 9
NumberOfPorts : 2
OperatingSystem : Windows, macOS, Linux
PartNumber : XBL-AV-10037
ProductDescription : LoveRPi USB UART Serial Debug Cable for Raspberry Pi, Libre Computer, and other 3.3V Systems
RED -> 5V POWER (Optional)
GREEN -> 3.3V TX to RX OF DEVICE
WHITE -> 3.3V RX to TX OF DEVICE
BLACK -> 0V GND

ProductSiteLaunchDate : 2018-06-12T07:00:00.000Z
RecommendedUsesForProduct : controlling devices and displays requiring RS-232 serial control
Size : 3.3V (Raspberry Pi)
SpecificUsesForProduct : personal
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 43202222
UpperTemperatureRating : 50 degrees_celsius
Voltage : 48 volts