Cart 2 india

Specification
Brand : QCCAN
BulletPoint1 : This module is mainly placed behind the stepper motor to obtain the rotation angle of the stepper motor. This principle is to use the AS5600 magnetic encoding, and then stick a magnet on the main shaft of the stepping motor. Information such as the rotation speed of the spindle can be obtained through magnetic encoding.
BulletPoint2 : AS5600 magnetic encoder high precision, a variety of output modes: IIC , PWM and voltage. Non-contact magnetic induction angle measurement module.
BulletPoint3 : Made of high quality material, the module is durable and has long service life. It is made of KB-A grade FR-4 glass fiber board with a thickness of 1.6mm. The board surface is flat and not easy to be bent.
BulletPoint4 : AS5600 is also equipped with an intelligent low power consumption mode, which automatically reduces power consumption. The input pin (DIP) selects the output polarity rotation direction.
BulletPoint5 : Package included: 2pcs AS5600 magnetic encoder module with magnet and pin header
ConnectorType : Quick Connect
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 701715491748
ExternallyAssignedProductIdentifier2 : 0701715491748
ItemName : QCCAN 6PCS High Precision AS5600 Magnetic Encoder Magnetic Induction Angle Measurement Sensor Module 12bit (2)
ItemPackageDimensions_Height : 8.1026 centimeters
ItemPackageDimensions_Length : 0.7112 centimeters
ItemPackageDimensions_Width : 5.1054 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sensor-blocks
Manufacturer : QCCAN
Material : Copper
ModelNumber : QC19005
MountingType : surface
NumberOfContacts : 6
NumberOfItems : 2
NumberOfLevels : 1
OperatingVoltage : 3.3 volts
PartNumber : QC19005
ProductDescription :

This module is mainly placed behind the stepper motor to obtain the rotation angle of the stepper motor. This principle is to use the AS5600 magnetic encoding, and then stick a magnet on the main shaft of the stepping motor. Information such as the rotation speed of the spindle can be obtained through magnetic encoding.

 

Specification:

Product parameter: AS5600 magnetic encoder

Color: As pictures shown.

Size: approx. 23x23mm(0.91x0.91in)

Product type: Non-contact magnetic induction

Out mode:IIC ,PWM, voltage, etc.

 

Interface description:

VCC: 3.3 V

GND: Power Ground

Out: PWM / analog voltage output

DIR: Rotational direction (grounding=clockwise value increases ; Connect to VCC =Clockwise values decreased)

SCL: IIC communication clock line

SDA: IIC communication data line

GPO: Mode selection (internal pull-up, ground=Programming mode B)

 

Feature:

1.It is made of KB-A grade FR-4 glass fiber board with a thickness of 1.6mm. The board surface is flat and not easy to be bent. Each PCB board has been tested by flying probes before leaving the factory, and the quality is worth relying on.

2.Non-contact magnetic induction angle measurement module. High precision, multiple output modes, IIC, PWM, voltage, etc.

3.AS5600 is also equipped with an intelligent low power consumption mode, which automatically reduces power consumption. The input pin (DIP) selects the output polarity rotation direction.

 

Note:

Please allow 1-3cm error due to manual measurement.

 

Package includes:

2x AS5600 Magnetic Encoder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ProductSiteLaunchDate : 2022-04-01T10:13:00.170Z
SupplierDeclaredDgHzRegulation : not_applicable
Voltage : 3.3 volts