Cart 2 india

Specification
Brand : DiGiYes
BulletPoint : 3.3V I2C Digital RGBW Color Sensor VEML6040 Breakout For Arduino
BulletPoint1 : This version of the CJMCU-MCP4725 Breakout fixes a few issues with the board including the IC footprint, the I2C pin out, changes the overall board dimensions to better fit your projects.
BulletPoint2 : This board breaks out each pin you will need to access and use the MCP4725 including GND and Signal OUT pins for connecting to an oscilloscope or any other device you need to hook up to the board. Also on board are SCL, SDA, VCC, and another GND for your basic I2C pin out.
BulletPoint3 : If you are looking to have more than one MCP4725 on a bus, the pull up resistors on this board can be disabled.
BulletPoint4 : I2C Interface (Standard, Fast, and High-Speed supported).
BulletPoint5 : MCP4725 is a single channel 12 bit buffered voltage output DAC with non-volatile memory (EEPROM). The user can store the configuration register bits (2 bits) and DAC input data (12 bits) into non-volatile EEPROM (14 bits) memory. The DAC can be configured into normal mode or power saving off mode by setting the configuration register bit. The device can use a 2-wire I2C compatible serial interface and is powered by a single power supply with a voltage range of 2.7V to 5.5V.
CircuitType : no
ConnectivityProtocol : X-10
ConnectivityTechnology : I2C
ConnectorType : No
ControlMethod : touch
CurrentRating : 2 amps
ExternallyAssignedProductIdentifier : 4862440107345
IncludedComponents : 3 x MCP4725 Module
InternationalProtectionRating : IP00
ItemName : DiGiYes 3Pcs MCP4725 Module Breakout Module 12 Bit I2C IIC DAC Development Board
ItemPackageDimensions_Height : 0.65 inches
ItemPackageDimensions_Length : 1.18 inches
ItemPackageDimensions_Width : 1.18 inches
ItemTypeKeyword : sensor-blocks
LightType : no
Manufacturer : DiGiYes
Material : tile
MountingType : Surface Mount
NumberOfItems : 3
OperatingVoltage : 3 volts
OperationMode : no
PartNumber : 260
ProductDescription :
Features:
- 12-bit resolution.
- I2C Interface (Standard, Fast, and High-Speed supported).
- Internal EEPROM to store settings.
- Power Supply: 2.7 - 5.5 V
Package Include:
3 x MCP4725 Module
ProductSiteLaunchDate : 2023-06-06T02:36:15.548Z
SpecificationMet : No
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : No
TerminalType : No
UnitCount : 1
WarrantyDescription : This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.