Cart 2 india

Specification
Brand : DAHSLNWKN
BulletPoint : Relays
BulletPoint1 : Fully Customizable Kit
BulletPoint2 : UL 600V Rating
BulletPoint3 : UL 10-22 AWG Rating
BulletPoint4 : UL 30A Rating
BulletPoint5 : Ground Block, End Covers, Jumpers, And Rail Included
Color : 12v
ConnectorType : Screw
CurrentRating : 30 amps
ExternallyAssignedProductIdentifier : 9067600348575
ExternallyAssignedProductIdentifier1 : 737123112371
ExternallyAssignedProductIdentifier2 : 0737123112371
ExternallyAssignedProductIdentifier3 : 00737123110377
IncludedComponents : Jumpers
ItemName : DAHSLNWKN 5V 12V 24V Relay Module with Optocoupler Relay Output 1 2 4 6 8 16Way Relay Module 1Pcs (Color : 12v, Size : 2 Way)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sensor-blocks
Manufacturer : DAHSLNWKN
Material : Copper
ModelName : DAHSLNWKN
ModelNumber : DAHSLNWKN
MountingType : din_rail
NumberOfContacts : 2
NumberOfItems : 1
NumberOfPoles : 4
NumberOfPositions : 2
OperatingVoltage : 250 volts
PartNumber : DAHSLNWKN
ProductDescription : Relays
Relays
Relay Control Module
Parameters:There are 4 fixing screw holes around the board, the hole diameter is 3.1mm, which is convenient for installation and fixing.
The relay uses high quality Songle relay, single pole double throw. a common end, a normally open end, and a normally closed end.
Optocoupler isolation, good anti-interference.
Low level pull-in, high level release. The status indicator is on when the inverter is closed, and the status indicator is off when released.
VCC is the system power supply, and JD_VCC is the relay power supply.
Electrical parameters:
Supply voltage: DC 5V/12V/24V
Current: greater than 100mA
Load: 250V 10A AC or 30V 10A DC
Wiring instructions:
VCC: system power supply positive
GND: system power supply negative
IN1--IN2: Relay Control Por
ProductSiteLaunchDate : 2024-03-20T08:12:13.290Z
Size : 2 Way
SpecificationMet : Din
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 600 volts