Cart 2 india

Specification
Brand : Oumefar
BulletPoint1 : MAIN FUNCTION: The IR Flame Sensor Module can detect flame or light with wavelength of 760~ 1100nm wavelength. The lighter flame test distance is 80cm. The larger the flame, the longer the test distance.
BulletPoint2 : SENSITIVE: The Flame Sensing Relay Module is particularly sensitive to the flame spectrum, and its detection angle is about 60 degrees, and its working performance is outstanding.
BulletPoint3 : OUTPUT FORMAT: The Fire Detection Sensor Module adopts DO digital switching outputs (0 and 1) and AO analog voltage output. The signal is clean, the waveform is good, and the driving ability is strong, greater than 15mA.
BulletPoint4 : ADJUSTABLE: The Flame Sensor Module has an adjustable precision potentiometer, which can be used for sensitivity adjustment. It also has fixing bolt holes for easy installation.
BulletPoint5 : 100% BRAND NEW: The Fire Detector Sensor is 100% brand new and high quality, it has undergone strict safety and quality testing before leaving the factory to ensure the best quality.
ConnectivityProtocol : X-10
IncludedComponents : inc
InternationalProtectionRating : IP00
ItemName : 5pcs IR Flame Sensor Module, Fire Detection Detector Sensor Flame Sensing Relay Module for Detecting Flame, IR Sensor Module Compatible with Arduino Smart Car Robot
ItemPackageDimensions_Height : 10.5 centimeters
ItemPackageDimensions_Length : 2.1 centimeters
ItemPackageDimensions_Width : 7.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sensor-blocks
Manufacturer : Oumefar
Material : Material
MaximumSupplyVoltage : 5 volts
MeasuringRange : ±45 degrees
ModelNumber : a19041900ux0417
MountingType : Surface Mount
NumberOfItems : 1
OperatingVoltage : 5 volts
OperationMode : Automatic
OutputType : Digital
PartNumber : Oumefarebg194wscu312
ProductDescription : Features:
Can detect a flame or the light of 760~ 1100nm wavelength, lighter flame test distance of 80cm, for the greater flame, the farther the distance test.
The detection angle is about 60 degrees, particularly sensitive to the flame spectrum.
Sensitivity is adjustable (shown in blue digital potentiometer adjustment).
Comparator output, clean, good waveform, strong driving ability, more than 15mA.
With adjustable precision potentiometer for sensitivity adjustment.
With fixed bolt holes for easy installation.

Specifications:
The working voltage: 3.3V-5V
The output format: DO digital switching outputs (0 and 1) and AO analog voltage output
Comparator: wide voltage LM393
Length: 4.5cm / 1.77in
Weight: 4g
Wiring instructions:
Product wiring description:
VCC: 3.3-5V power supply "+"
GND: power supply "-"
DO:  TTL switch output.
AO: analog output (voltage )
Instructions for use:
1. the flame sensor is most sensitive to flame, for ordinary light, it is also responsive
, generally used as a flame alarm purposes.
2. the output interface can be directly connected to the micro-controller IO port.
3. The sensor must be kept at a distance from the flame to avoid damage to the sensor.
lighter flame test distance of 80cm, for the greater flame, the farther the distance test
4. Analog output and the AD conversion process, can achieve higher accuracy
5. When the sensor detects a flame,  sunlight, or infrared light, if achieve potentiometer setting threshold, the green indicator light will ON, the DO output low level (0-0.1 - V), the green light is OFF, the DO output about 3 V high voltage level

Package included:
5 x  IR Flame Sensor Module

ProductSiteLaunchDate : 2021-08-06T16:56:17.235Z
Size : SW-520D (1pcs)
SpecificUsesForProduct : High current applications
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 5
Voltage : 1 volts